Install Glider
INSTALL THE GLIDER IN CABINET FRAME
The Glider slides should move in and out easily. If not, check alignment of the slider and
Pull the two Glider slides out until they lock.
Simultaneously press in the catches on each slider and move the Glider all the way into the cabinet frame.
Feed the cables from the Glider back through the cabinet frame.
Guide the Glider into the slides and slide the Glider in until it stops.
Hold the Glider on each side over the back set of rollers, with the front into your stomach. The Glider MUST be level. This step may best be done with two people, one on each side of the slide rails.
If the Glider binds during insertion, the Glider rollers are not properly aligned into the slider recepticle.
If aligned properly, the rollers on the Glider slide smoothly into and out of the slider rails.
9
Doc#