NOTE: If at this point the screen image is not crisp, repeat Steps
To adjust the screen for the best possible display, try the following:
•Press the 
and 
buttons until you have a universally fuzzy screen.
•Count the number of 
button presses for the screen to go from fuzzy to clear to fuzzy again.
•Divide the number of presses by
two and press the 
button that many times to precisely end up at the clearest setting.
•The clearest setting may also be verified by visually monitoring the screen while adjusting the settings.
Step 6: Adjust Brightness
NOTE: See “Saving Settings” earlier in this manual for a complete discussion of this subject.
If the brightness adjustment is made to maximize the display visibility, press the “SELECT” button until the “Brt” indicator is illuminated, then use the 
and 
buttons to increase/ decrease the display brightness. The factory default setting is maximum brightness.
Step 7: Saving Adjustments
The screen settings will automatically be saved as long as the power is maintained for at least five seconds after the last adjustment.
23