Installing Interface Bracket to PLP Adapter Plate
2 | To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place |
screen face side down. Attach the interface bracket (BB) to the PLP adapter plate (sold separately) using four M10 x |
15 mm socket head screws (EE) as shown in figures 2.1 (portrait) or 2.2 (landscape).
WARNING
•Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
GENERICPLP
ADAPTER PLATE
BB | GENERICPLP |
ADAPTER PLATE |
EE | EE |
|
BB
fig. 2.2
fig. 2.1(landscape) (portrait)
7 of 9 | ISSUED: |