Mounting and Removing Flat Panel Screen
3 | Note: Security screw may need to be loosened to avoid interference with wall plate. |
| Hook interface bracket (BB) onto wall plate (AA). Then slowly swing screen in as shown. Turn security screw, using |
security allen wrench (FF), clockwise at least six times to prevent screen from being removed as shown in detail 1. Screen can be adjusted horizontally if desired.
Note: To lock the screen down, tighten security screw to wall plate using security allen wrench as shown in detail 1.
To remove screen from mount, loosen security screw, swing screen away from mount, and lift screen off of mount.
WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
BB
AA
SECURITY
SCREW
BB
DETAIL 1
9 of 9 | ISSUED: |
© 2005 Peerless Industries, Inc. All rights reserved. SmartMount is a trademark and Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.