Peerless Industries SF 16D manual Installing Interface Bracket to LC Adapter Plate

Page 8

Installing Interface Bracket to LC Adapter Plate

2

To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place

screen face side down. Attach the interface bracket (BB) to the LC adapter plate (sold separately) using four M5

screws provided with plate as shown in figures 2.3 (portrait) or 2.4 (landscape).

WARNING

Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.

 

GENERICLC

GENERICLC

ADAPTER PLATE

ADAPTER PLATE

BB

BB

M5 SCREWS

M5 SCREWS

fig. 2.3

fig. 2.4

(landscape)

(portrait)

 

8 of 9

ISSUED: 08-02-05 SHEET #: 202-9010-1

Image 8
Contents Models SF 16D Features Table of Contents Tools Needed for AssemblyAccessories Parts List Installation to Single Wood Stud Wall Skip to onInstallation to Double Wood Stud Wall Installation to Solid Concrete or Cinder Block CC DDInstalling Interface Bracket to PLP Adapter Plate 1landscape portraitInstalling Interface Bracket to LC Adapter Plate Mounting and Removing Flat Panel Screen Detail