WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
Insert two M4 x 12 mm screws (D) into top two holes of
2screen, leaving approximately 1/4" of exposed thread. Hook screws onto keyslots of adapter plate as indicated in figures 2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20 mm screws (E) with two retaining spacers (F) into top two holes of screen as indicated right.
*For screens with |
|
a hole pattern in a |
|
pocket, spacers (F) |
|
go between adapter | F |
plate and screen. |
D | 1/4" |
FOR VESA® 75 | FOR VESA100 |
MOUNTING PATTERN: | MOUNTING PATTERN: |
fig. 2.1
fig. 2.2
Insert one M4 screw (D or E) through bottom hole of
3adapter plate as shown in figure 3.1.
ADAPTER
PLATE
D or E
fig. 3.1
6 of 29 | ISSUED: |