Installing Security Screws for PF and PT wall mount models
Replacing Safety/Security Screw
1 | NOTE: If installing security screws for SA wall mount models, skip to page 6. | |
Replace safety/security screws with M5 x 25 mm screw (B). Hand thread screw into bottom of flat or tilt adapter | ||
| bracket as shown in figure 1.1 and 1.2. |
|
| NOTE: Be sure tip of screw is flush with top of adapter bracket hole. |
|
| FLAT BRACKETS | TILT BRACKETS |
TOP OF ADAPTER BRACKET
B
TOP OF ADAPTER BRACKET
B
fig 1.1 | fig 1.2 |
2 of 9 | ISSUED: |
Visit the Peerless Web Site at | For customer care call |