Nokia 9828 owner manual Connecting the Mediamaster to the TV, Connecting a TV and VCR

Page 10

INSTALLATION OF THE MEDIAMASTER

Connecting the Mediamaster

There are many different types of TV/VCR and other equipment you can connect to the Mediamaster.

In this manual you will see some of the most common ways to connect your equipment.

If you use RF leads you will have to tune your TV and VCR to the

Mediamaster output channel (see page 12).

If you have problems with your connections and need help, con- tact your dealer or Service Provider.

Connecting the Mediamaster to the TV

•Connect a SCART lead between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.

•Connect an RF lead from the TV/VCR output on the Media-

master to the RF input socket on the TV.	SCART	RF

•Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.

Connecting a TV and VCR

Refer to your VCR’s manual for full instructions.

If your TV and VCR have two SCART-sockets

•	Connect a SCART lead between the main SCART socket on
	the TV and the TV SCART socket on the Mediamaster.
• Connect a SCART lead between the VCR and the AUX SCART
	socket on the Mediamaster.
•	Connect a SCART lead between the VCR and the second
	SCART socket on the TV.
•	Connect an RF lead from the TV/VCR output on the Media-

Aerial

SCART

Video

RF SCART

RF

	master to the RF input socket on the VCR.
•	Connect an RF lead from the RF output on the VCR to the TV
	AERIAL input socket on the TV.
•	Connect the TV aerial directly to the TV AERIAL input socket
	on the Mediamaster.

SCART

Media- master

If your VCR only has one SCART-socket

• Follow connection details from above, but without the 3rd

SCART lead.

Your VCR will then need to be tuned to the Mediamaster.

Aerial

RF

Video

RF SCART

Media-

SCART master

GB 10

Image 10

Contents Page Page Contents Mediamaster 9828 TFor Your Safety General Operation of the MediamasterRemote Control Front Panel Front and Rear PanelRear Panel General About the Smartcard and CA ModuleInserting the CA module and the smartcard Connection of the Mediamaster Preparing the Remote ControlAbout the Scart sockets Standard outdoor aerial Installation of the MediamasterConnecting to the TV aerial Indoor and window-mounted aerialsConnecting a TV and VCR Connecting the MediamasterConnecting the Mediamaster to the TV If your TV and VCR have two SCART-socketsConnecting a HiFi system Connecting an Satellite Receiver and a VCRSocket on the satellite analogue or digital receiver Procedure when RF Connections are Used Switching on for the First Time with Scart ConnectionsTuning your TV to the Mediamaster Welcome Menu First Time InstallationGeneral Information LanguageAutomatic Search RF modulator typeChannel Search Manual SearchFinishing the first time installation Time adjustmentChannel Search Progress Viewing Mode Programme InformationInformation. The i Button GuideAudio Language List of ChannelsOptions. The green button Subtitle LanguageText Button Teletext TV ReleaseVideo Recording FormatTV and Radio Channels Main MenuEdit Channels Rename list How to give a specific nameCreate list Rearrange listsLock Channels Select ChannelsRename Channels Delete Channels Rearrange ChannelsRemove Channels System Configuration TV Settings User Preferences Receiver UpgradeReinstall Language PreferencesParental Control Appearance PreferencesSystem Information Conditional AccessDiagnostics System InformationGlossary of Terms Audio systemProblem Solving Problem Possible causes What to doFront Panel Display Technical Specifications TV ScartPage 0142