Nokia 9828 owner manual Switching on for the First Time with Scart Connections

Page 12

INSTALLATION OF THE MEDIAMASTER

Switching on for the First Time with SCART Connections

Plug in your Mediamaster

Now you will see the ”Welcome” menu on the screen.

Press OK on the Mediamaster remote control to start the In- stallation procedure.

You may now proceed to “First Time Installation.”

Procedure when RF Connections are Used

This procedure is necessary only if your Mediamaster is con- nected to the TV with an RF lead and no SCART leads are used.

To tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCART leads in your con- nection.

Plug in your Mediamaster.

Tuning your TV to the Mediamaster

Select a channel number on the TV that is not currently used for other TV channels.

Follow the instructions in your TV manual to tune the TV chan- nel selector to UHF channel 43 (this is the Mediamaster’s fac- tory preset UHF channel). If you are already using this chan- nel, select another non occupied UHF channel between 21to 69 on the TV.

If you need to change UHF channel you do as follows:

First you change on the Mediamaster. Use the or buttons on the front panel of the Mediamaster, or on the remote. You will see the UHF channel number displayed on the front panel of the Mediamaster. Then, tune the TV channel selector to the same UHF channel.

When you have correctly changed the UHF channel number you will see the ”Welcome” menu on the TV screen.

If there is interference from other channels you will have to change the chosen UHF channel.

Follow the instructions in your TV manual to store this UHF chan- nel as the channel used by your Mediamaster. You will have to select it when you want to watch terrestrial digital TV channels.

Once the welcome message is visible, press the OK button on the Mediamasters remote control to start the installation procedure.

If for some reason you have to change the RF channel later, you can do this by using TV settings menu further on in this manual. If you have a VCR connected it must be tuned to a dif- ferent UHF channel (between 21 to 69) than the Mediamaster.

You may now proceed to “First Time Installation.”

GB 12

Image 12
Contents Page Page Contents Mediamaster 9828 TFor Your Safety General Operation of the MediamasterRemote Control Front and Rear Panel Front PanelRear Panel About the Smartcard and CA Module GeneralInserting the CA module and the smartcard Preparing the Remote Control Connection of the MediamasterAbout the Scart sockets Installation of the Mediamaster Connecting to the TV aerialStandard outdoor aerial Indoor and window-mounted aerialsConnecting the Mediamaster Connecting the Mediamaster to the TVConnecting a TV and VCR If your TV and VCR have two SCART-socketsConnecting an Satellite Receiver and a VCR Connecting a HiFi systemSocket on the satellite analogue or digital receiver Switching on for the First Time with Scart Connections Procedure when RF Connections are UsedTuning your TV to the Mediamaster First Time Installation General InformationWelcome Menu LanguageRF modulator type Channel SearchAutomatic Search Manual SearchTime adjustment Finishing the first time installationChannel Search Progress Viewing Mode Programme InformationInformation. The i Button GuideList of Channels Options. The green buttonAudio Language Subtitle LanguageTV Release Video RecordingText Button Teletext FormatMain Menu TV and Radio ChannelsEdit Channels How to give a specific name Create listRename list Rearrange listsSelect Channels Lock ChannelsRename Channels Rearrange Channels Delete ChannelsRemove Channels System Configuration TV Settings Receiver Upgrade ReinstallUser Preferences Language PreferencesParental Control Appearance PreferencesConditional Access DiagnosticsSystem Information System InformationGlossary of Terms Audio systemProblem Solving Problem Possible causes What to doFront Panel Display Technical Specifications TV ScartPage 0142