Nokia 9828 owner manual Technical Specifications, TV Scart

TECHNICAL SPECIFICATIONS

Transmission Standards DVB, MPEG 2, OFDM Conditional Access system:

RF input Modulator output

In-/output connector		IEC female / IEC male
RF input frequency		470 to 862 MHz
RF input power level		-78 to -30 dBm
RF impedance		75 Ω
Frequency range		Loop through 47-862MHz
Frequency range		RF modulator 470-862 MHz
Output channel		UHF CH 21-69
Preset channel		43
Output signal		PAL B/G
Modulation		Supports 2k and 8k
TV SCART		1 Vpp (± 1 dB) / 75 Ω
Video output
Audio output		0,5 Vrms / RL >10 kΩ
RGB output		Internal RGB or from
		AUX SCART
RGB bandwidth		5,8 MHz ± 3 dB
Fast blanking output		Internal or from
		AUX SCART
Status output		0/6/12 V / RL 10 kΩ
AUX SCART
Video output		1 Vpp (± 1 dB) / 75 Ω
Video input		1 V pp / 75 Ω
Audio output		0,5 Vrms / RL >10 kΩ
Audio input		0,5 Vrms / RL >10 kΩ
Status input		0/6/12 V / RL >10 kΩ
Fast blanking input		0/2 V for RGB, bypass to
		TV SCART
RGB input		Yes
DIGITAL AUDIO (S/PDIF)
Connector		1 x RCA
AUDIO R L
Connector		2 x RCA (R+L)
Output		0,5 Vrms ± 0,5 dB/ RL 10 kΩ
SERIAL (RS 232) Serial data
Connector	9-pin D-sub male
Signals	RS232, max. 115,2 kbit/s
Pin 1 DCD	(Data carrier detect) not connected
2 RXD	(Receive data)
3 TXD	(Transmit data)
4 DTR	(Data terminal ready) Set to high
5 GND	(Signal ground)
6 DSR	(Data set ready) not connected
7 RTS	(Ready to send)
8 CTS	(Clear to send)
9 RI	(Ring indicator) not connected

One slot for a Common Interface CA module (DVB and PCMCIA Standards).

Front panel

4x7 segment numeric LED display, Buttons: ,▼ ▲

General data

The model code, variant and serial number, are located on a label on the underside of the housing.

Supply voltage		95-250 V AC, 50-60 Hz
Power consumption max		20 W
Power consumption in
standby		3 W
Operating temperature		+5° C to +45° C
Storage temperature		- 40° C to +65° C
Humidity		25 to 75 % rel humidity
Operating distance for
remote control		max 10 meters
Dimensions (w x d x h)		380 x 240 x 65 mm
Weight		1,8 kg approx
SCART sockets
	TV	AUX
1	Audio out right ch.	Audio out right ch.
2	-	Audio in right ch.
3	Audio out left ch.	Audio out left ch.
4	Audio ground	Audio ground
5	RGB blue ground	RGB blue ground
6	-	Audio in left ch.
7	RGB blue signal out	RGB blue signal in
8	Switch voltage out	Switch voltage in
9	RGB green ground	RGB green ground

10Connect to pin 10 in AUX scart

11RGB green signal out RGB green signal in

12	-	-
13	RGB red ground	RGB red ground
14	Fast blank. ground	Fast blank. ground
15	RGB red signal out	RGB red signal in
16	Fast blanking out	Fast blanking in
17	Video out ground	Video out ground
18	-	Video in ground
19	Video out	Video out
20	-	Video in
21	Ground (casing)	Ground (casing)

20	2
21	1

GB 32