Paradyne 9123 manual Network LMI-Reported DLCIs Status, Test Status Messages 2 What It Indicates

Page 126

Operation and Maintenance

Table 5-8. Test Status Messages (2 of 2)

Message

What It Indicates

 

 

Send Pttn Active, DLCI nnnn,

The unit is monitoring the selected test pattern on

frame_relay_link 1, 2

the specified DLCI for the interface.

Send Pttn Active, [Interface]

A Send Pattern test is active on the specified

 

 

interface.

 

 

This test cannot be activated on user data ports

 

 

that have Port Use set to Frame Relay.

 

 

 

1

nnnn indicates a DLCI number of 16 through 1007.

2

frame relay link is one of the following:

 

± Net1-FR1. The frame relay link specified for the network interface, Network 1.

 

± Port-1. The frame relay link associated with the user data port.

 

 

 

Network LMI-Reported DLCIs Status

Network LMI-reported DLCI statuses are selected from the Status menu.

Main Menu → Status → LMI Reported DLCIs

The LMI Reported DLCIs screen displays the status and CIR (if supported by the switch) for each DLCI, whether the DLCI is configured or not.

This screen only appears when Service Type is set to Frame Relay.

LMI-Reported DLCIs Status Screen Example

main/status/lmi_dlcis

 

 

 

9123-C-SLV

Device Name: Node A

 

 

 

 

3/26/2000 23:32

 

 

 

frame relay link LMI REPORTED DLCIs

Page 1 of 2

 

DLCI

STATUS

CIR (bps)

 

DLCI

STATUS

CIR (bps)

*

300

Active

16000

*

622

Active

32000

*

305

Inactive

 

*

624

Active

32000

*

400

Deleted

 

*

625

Deleted

 

*

410

Inactive

 

*

713

Active

32000

 

411

Inactive

 

*

822

Active

32000

 

420

Inactive

32000

*

1002

Active

32000

430Active

501Inactive

511

Active

256000

520

Active

64000

*± DLCI is configured on the Frame Relay Link.

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

 

ESC for previous menu

MainMenu Exit

Refresh PgUp PgDn

NextLink

PrevLink

 

An asterisk (*) next to the DLCI indicates that the DLCI has been configured for the link.

5-18

July 2000

9123-A2-GB20-10

Page 125 Page 127
Image 126
Page 125 Page 127
Contents FrameSaver Flex Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Security and Logins Troubleshooting Setting Up NetScout Manager Plus for FrameSaver Devices Index About This Guide Purpose and Intended AudienceDocument Organization Setting Up NetScout Manager Plus for FrameSaver Setting Up OpenLane for FrameSaver Devices. IdentifiesWhere installation and setup information is located and how Devices. Describes setup of the NetScout Manager PlusProduct-Related Documents To indicate a hyperlink to additional information When viewing this manual online. Click onConventions Used Highlighted textAbout the FrameSaver Flex System OverviewSystem Overview FrameSaver Flex Feature Sets Feature Feature Set Basic Advanced Flex Flex SLVBasic Flex Features Models 9123-A1-211 9123-A1-213 Feature 9123-A1-221 9123-A1-223Maximum Number of PVCs and Management PVCs Supported Through Connections PVCs Dedicated Management PVCsJuly Advanced Flex SLV Features OpenLane SLM System NetScout Manager Plus and NetScout Probes About the FrameSaver Flex User Interface Basic Operation Procedure Logging OnIf your login was Then Main Menu SelectMain Menu Service Level Verification System Options Screen Work AreasScreen Format Description Navigating the Screens Keyboard KeysPress Function Keys Select For the screen Press Enter to FunctionSwitching Between Screen Areas Selecting from a MenuSelecting a Field Entering InformationExample User Interface and Basic Operation Configuration Configuration Basic Configuration Configuration MenuConfiguration EDIT/DISPLAY Configuration Option Areas Configuration Option Area DescriptionAccessing and Displaying Configuration Options Main Menu → ConfigurationChanging Configuration Options Configuration → PVC ConnectionsSaving Configuration Options Using the Easy Install Feature Main Menu → Easy InstallEasy Install Screen Example If the selection is Unit is configured to operate DefaultConfiguration → Data Ports → Dlci Records Setting Up So the Router Can Receive RIPEntering System Information Setting the System Clock Main Menu → Control → System InformationAuto-Configuration Screen Example Setting Up Auto-ConfigurationMain Menu → Auto-Configuration AUTO-CONFIGURATIONSelecting a Frame Relay Discovery Mode Main Menu → Auto-Configuration → Frame Relay Discovery ModeDiscovery Mode Configuration Description 9123-A2-GB20-10 July Automatically Removing a Circuit Setting Up Back-to-Back Operation Changing Operating ModeMain Menu → Control → Change Operating Mode Configuration Option Tables Configuring the Overall SystemSystem Frame Relay and LMI Options 1 Configuring Frame Relay and LMI for the SystemMain Menu → Configuration → System → Frame Relay and LMI LMI BehaviorLMI Status Enquiry N1 Possible Settings 1, 2, 3, 4 System Frame Relay and LMI Options 2Traffic Policing LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 System Frame Relay and LMI Options 3Configuring Service Level Verification Options Service Level Verification Options 1Service Level Verification Options 2 SLV Timeout Clearing Event ThresholdSLV Packet Size bytes Configuring General System Options Main Menu → Configuration → System→ GeneralGeneral System Options Main Menu → Configuration → Network → Physical Configuring the Physical InterfacesConfiguring the Network Interface Network Physical Interface Options 1Transmit Timing Network Physical Interface Options 2Bit Stuffing Network Initiated LLBNetwork Initiated PLB Network Initiated Dclb Possible Settings Disable, V.54&ANSINetwork Physical Interface Options 3 Ansi Performance Report MessagesNetwork Physical Interface Options 4 Circuit IdentifierData Port Physical Interface Options 1 Configuring the User Data PortMain Menu → Configuration → Data Ports → Physical Transmit Clock SourceData Port Physical Interface Options 2 Monitor RTS ControlPort DTE Initiated Loopbacks Main Menu → Easy Install → Time Slot Assignment Screen Assigning Time Slots/Cross ConnectionsAssigning Frame Relay Time Slots to the Network Interface Time Slot Assignment Rule Frame Relay Network Time Slot Assignment Screen ExampleValue Meaning Frame Relay Network 1 AssignmentSelect Frame Relay Network Assignments Assigning the Synchronous Data Port to Network Time Slots Synchronous Data Port Assignment Screen ExampleSync Data Port Assignment Clearing Assignments Configuring Frame Relay for an Interface Interface Frame Relay Options 1Interface Frame Relay Options 2 LMI ParametersInterface Frame Relay Options 3 Frame Relay DS0s Base RateDlci Type Possible Settings Standard, Multiplexed Manually Configuring Dlci RecordsMain Menu→ Configuration→ Network/Data Port→ Dlci Records Dlci Record Options 1Committed Burst Size Bc Bits Dlci Record Options 2CIR bps Excess Burst Size BitsDlci Record Options 3 Dlci PriorityOutbound Management Priority Configuring PVC Connections Main Menu → Configuration → PVC ConnectionsPVC Connection Options 1 Destination Dlci PVC Connection Options 2Destination Link Destination EdlciSetting Up Management and Communication Options Configuring Node IP InformationNode IP Options 1 TS Access Management Link Node IP Options 2TS Access Node IP Options 3Configuring Management PVCs 10. Management PVC Options 1Name Primary Link Possible Settings Net1-FR1, Port-1, Clear 10. Management PVC Options 2Set DE 10. Management PVC Options 3 Primary DlciPrimary Edlci 11. General Snmp Management Options 1 Configuring General Snmp ManagementName 1 Access Snmp ManagementConfiguring Telnet and/or FTP Session Support 11. General Snmp Management Options 212. Telnet and FTP Session Options 1 Inactivity Timeout 12. Telnet and FTP Session Options 2Disconnect Time Minutes FTP Login Required12. Telnet and FTP Session Options 3 FTP Session13. Snmp NMS Security Options Configuring Snmp NMS SecurityAccess Type NMS IP ValidationSnmp Traps Configuring Snmp Traps14. Snmp Traps Options 1 Number of Trap Managers14. Snmp Traps Options 2 Enterprise Specific TrapsLink Traps Possible Settings Disable, Up, Down, Both 14. Snmp Traps Options 3Rmon Traps Configuring the Ethernet Port 15. Ethernet Port Options 1Interface Status 15. Ethernet Port Options 2 Proxy ARPPort Use Configuring the Communication Port16. Communication Port Options 1 Character LengthStop Bits Login Required16. Communication Port Options 2 Ignore Control Leads16. Communication Port Options 3 16. Communication Port Options 4 RIPDial-In Access Configuring the COM Port to Support an External ModemExternal Modem Commands 17. External Modem COM Port OptionsConfiguration Security and Logins Limiting Access Controlling Asynchronous Terminal AccessSet the configuration option Controlling External COM Port Device Access Controlling Telnet or FTP AccessLimiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Controlling Snmp Access Disabling Snmp AccessAssigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Creating a Login Main Menu → Control → Administer LoginsField Enter Modifying a Login Deleting a LoginOperation and Maintenance Displaying System Information Main Menu → Status → IdentityView this field To find Viewing LEDs and Control Leads Main Menu → Status → Display LEDs and Control LeadsDisplay LEDs & Control Leads Screen LED Descriptions General Status LEDs 1 Label Indication Color What It MeansGeneral Status LEDs 2 Label Indication Color What It Means Network Interface LEDs Label Indication Color What It MeansAdditional Control Leads Label Indication What It Means Control Lead DescriptionsUser Data Port LED Label Indication Color What It Means Network InterfaceDevice Messages Device Messages 1 What It Indicates What To DoDevice Messages 2 What It Indicates What To Do See Changing SoftwareDevice Messages 3 What It Indicates What To Do Device Messages 4 What It Indicates What To Do SoftwareDevice Messages 5 What It Indicates What To Do Changes? promptStatus Information Status MenuStatus System and Test Status Messages Self-Test Results Messages Last System Reset Date and TimeLast System Reset Date and Time Self-Test Results MessagesHealth and Status Messages Health and Status Messages 1 What It IndicatesHealth and Status Messages 2 What It Indicates Frame relay linkHealth and Status Messages 3 What It Indicates Frame relay link 1, 2Test Status Messages Test Status Messages 1 What It IndicatesMain Menu → Status → LMI Reported DLCIs Network LMI-Reported DLCIs StatusTest Status Messages 2 What It Indicates LMI-Reported DLCIs Status Screen ExampleNetwork LMI-Reported DLCIs Status Field What It Indicates PVC Connection Status Screen Example PVC Connection StatusMain Menu → Status → PVC Connection Status 10. PVC Connection Status 1 Field10. PVC Connection Status 2 Field What It Indicates Main Menu → Status → Timeslot Assignment Status → Network Time Slot Assignment StatusDisplaying Network Time Slot Assignments Network Timeslot Assignment Status Screen ExampleCross Connect Status Field Indicates Bottom IP Routing Table Screen Example IP Routing TableMain Menu → Status → IP Routing Table 11. IP Routing Table Values 1 Column What It Indicates11. IP Routing Table Values 2 Column What It Indicates Performance Statistics Menu Performance StatisticsMain Menu → Status → Performance Statistics Performance StatisticsPerformance Statistics → Frame Relay Clearing Performance StatisticsPerformance Statistics → Clear All Statistics Performance Statistics → ESF LineService Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Dlci Performance Statistics Main Menu → Status → Performance Statistics → Dlci13. Dlci Performance Statistics 1 What It Indicates 13. Dlci Performance Statistics 2 What It Indicates CIR&EIRMain Menu → Status → Performance Statistics → Frame Relay Frame Relay ErrorsFrame Relay Performance Statistics 14. Frame Relay Performance Statistics 1 What It IndicatesFrame Relay Errors contd 14. Frame Relay Performance Statistics 2 What It IndicatesFrame Relay LMI Frame Relay Hdlc Errors 14. Frame Relay Performance Statistics 3 What It IndicatesESF Line Performance Statistics Main Menu → Status → Performance Statistics → ESF LineTo select intervals You must enter an interval or time on ESF Line Performance Statistics Screen Example ±LOFC±±Statistic What It Indicates UASEthernet Performance Statistics Main Menu → Status → Performance Statistics → EthernetTrap Event Log Screen Example Trap Event LogMain Menu → Status → Trap Event Log Trap Event LOGFTP File Transfers Command Definition Dir directoryUpgrading System Software If the message displayed is ThenDetermining Whether a Download Is Completed Changing SoftwareTransferring Collected Data If retrieving ThenTroubleshooting Problem Indicators Indicators SeeResetting the Unit and Restoring Communication Resetting the Unit from the Control MenuResetting the Unit By Cycling the Power Restoring Communication with a Misconfigured Unit If selecting Following occursTroubleshooting Management Link Feature LMI Packet Capture Utility FeatureMain Menu → Control → LMI Packet Capture Utility LMI Packet Capture Utility → Display LMI Trace Log LMI Trace Log ExampleLMI Trace LOG Alarms Alarm Conditions 1 What It Indicates What To DoAlarm Conditions 2 What It Indicates What To Do Operational appearsAlarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems 1 Symptom Possible Cause Solutions Troubleshooting TablesDevice Problems Viewing the Trap Event LogDevice Problems 2 Symptom Possible Cause Solutions With a Misconfigured UnitFrame Relay PVC Problems Frame Relay PVC Problems Symptom Possible Cause SolutionsTests Available Test Menu ExampleTest Test Timeout Feature When the status of a test is Only command available isStarting and Stopping a Test Aborting All Tests PVC Tests PVC Tests Screen ExampleNetwork PVC Tests Main Menu → Test → Network PVC Tests PVC LoopbackSend Pattern Main Menu → Test → Data Port PVC TestsMonitor Pattern ConnectivityPhysical Tests Physical Tests Screen ExampleLine Loopback Main Menu → Test → Network Physical TestsPayload Loopback Repeater Loopback Send Line Loopback Data Channel Loopbacks on a Frame Relay Link Send and Monitor Pattern Tests QrssDTE Loopback Main Menu → Test → Data Port Physical TestsIP Ping Test Main Menu → Test → IP PingProcedure Lamp Test Main Menu → Test → Lamp TestOpenLane Support of FrameSaver Devices OpenLane Support of FrameSaver DevicesSetting Up the OpenLane SLM System Setting Up FrameSaver Flex and SLV Support Ordering Flex SLV Activations To Find Your License Key NumberActivation Certificate Administering and Managing Flex SLV Activations Entering an Activation Certificate Checking Activation Certificate StatusScheduling Activations Cancelling Scheduled Activations Accessing and Printing the Certificate Summary ReportChecking the Status of Scheduled Activations July Setting Up NetScout Manager Plus for FrameSaver Devices Properties AlarmsPreparation User historyConfiguring NetScout Manager Plus Procedure Adding SLV Alarms Using a Template Editing Alarms 9123-A2-GB20-10 July Adding SLV Alarms Manually Field Select or Enter ParadyneCreating History Files Procedure Installing the User-Defined History Files Dvuhist -f Dallas51 3 config 30 60 Dallas51k.udhMonitoring a DLCIs History Data July 9123-A2-GB20-10 July Monitoring the Agent Using NetScout Manager Plus Procedure Setting Up NetScout Manager Plus for FrameSaver Devices Setting Up Network Health for FrameSaver Devices Installation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports About Service Level Reports Generating Reports for a GroupAbout At-a-Glance Reports Reports Applicable to Flex and SLV Devices About Trend ReportsPrinted Reports July 9123-A2-GB20-10 July Setting Up Network Health for FrameSaver Devices Menu Hierarchy MenusMenu Hierarchy Frame Relay Mode StatusAuto-Configuration Easy InstallMenu Hierarchy Leased Line Mode Data Ports AssignmentControl Menu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults MIB Support Downloading MIBs and Snmp TrapsSystem Group mib-2 FrameSaver Units sysDescr systemFrameSaver Units sysObjectID system Physical Layer Interfaces Group mib-2Paradyne Indexes to the Interface Table ifTable Frame Relay Logical LayerNetScout Indexes to the Interface Table ifTable Rmon Logical LayerFor the DTE Standards Compliance for Snmp Traps ExamplesTable B-3. warmStart Trap What It Indicates Possible Cause Trap authenticationFailureTrap warmStart Variable-BindingTraps linkUp and linkDown Physical Sublayer MIBPhysical Sublayer contd Logical Link SublayerTraps enterprise-Specific DevHealthAndStatusSLVs devFrExt.mib Placeholder Traps RMON-Specific EventIndex EventDescription EventType EventCommunity Rmon Alarm and Event DefaultsEvent Defaults Rising Event OperationPhysical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Dlci Alarm Defaults ± Paradyne Area Dlci Alarm Defaults ± NetScout Area Rx Dlci Link Object ID Cross-References Numeric Order 6.1.2.1.2.2.1 6.1.2.1.2.10.32.2.16.1.4.1.1795.2.24.2 6.1.4.1.1795.2.24.2.6.9.4 Dlci CIRDlci EIR 6.1.4.1.1795.2.24.2.6.9.4.4.26.1.4.1.1795.2.24.2.6.9.4.5.2.1 6.1.4.1.1795.2.24.2.6.9.4.7.16.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Connectors, Cables, Pin Assignments Rear PanelT1 Network Interface T1 Network Cable Feature No -F1-500Canadian T1 Line Interface Cable Feature No -F1-510 Function Circuit Direction Pin NumberCOM Port Connector Signal Direction Pin #Standard EIA-232-D Crossover Cable PinAT Command String To configure the modem to Standard V.35 Straight-through Cable Data Port ConnectorSignal Direction Pin SocketEthernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications Ethernet Port COM PortT1 Network Interface Data PortEquipment List Description Model / Feature NumberFrameSaver Flex SLV Upgrade EquipmentCables Description Part Number Feature NumberOptional Features NMS ProductsIndex NumbersIN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9 IN-10
Related manuals
Manual 166 pages 36.17 Kb Manual 271 pages 14.3 Kb
Top Page Image Contents