Paradyne 9123 manual Network Physical Interface Options 3, Network Initiated PLB

Page 57

Configuration

Table 3-4. Network Physical Interface Options (3 of 4)

Network Initiated PLB

Possible Settings: Enable, Disable

Default Setting: Enable

Allows the initiation and termination of the payload loopback (PLB) to be controlled by the receipt of PLB-Actuate and PLB-Release commands from the network.

Display Conditions ± This option only appears when Line Framing Format is set to ESF.

Enable ± PLB is controlled by PLB-Actuate and PLB-Release commands. Receiving a PLB-Actuate command causes the system to enter a payload loopback (provided a PLB can be performed in the unit's current state). Receiving a PLB-Release command terminates the PLB.

Disable ± The FrameSaver unit ignores the PLB-Actuate and PLB-Release commands.

NOTE: When disabled, the unit is not in compliance with ANSI T1.403 or AT&T TR 54016.

Network Initiated DCLB

Possible Settings: Disable, V.54_&_ANSI

Default Setting: V.54_&_ANSI

Allows the initiation and termination of the Data Channel Loopback (DCLB V.54 Loop 2) to be controlled by the receipt of a DCLB-actuate or DCLB-release sequence (either V.54 or FT1-ANSI compliant) from the network on the DS0s used for the network frame relay link. When enabled and a DCLB-activate sequence is received, the unit initiates a DCLB on the network interface. When a DCLB-release sequence is received, the DCLB is stopped.

Disable ± DCLB-actuate and DCLB-release sequences are ignored.

V.54_&_ANSI ± DCLB-actuate and DCLB-release sequences that comply with either V.54 or ANSI T1.403, Annex B standard will be recognized and will control initiation and termination of a DCLB for the network frame relay link. The actuate and release sequences do not need to match (for example, a DCLB started with a V.54 actuate sequence can be stopped with an FT1 release sequence).

ANSI Performance Report Messages

Possible Settings: Enable, Disable

Default Setting: Disable

Specifies whether ANSI T1.403 compliance performance report messages (PRMs) are generated and sent to the network over the ESF facility data link every second.

Display Conditions ± This option only appears when Line Framing Format is set to ESF.

Enable ± Generates and sends PRMs.

Disable ± Does not generate and send PRMs.

9123-A2-GB20-10

July 2000

3-25

Image 57

Contents FrameSaver Flex Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Security and Logins Troubleshooting Setting Up NetScout Manager Plus for FrameSaver Devices Index About This Guide Purpose and Intended AudienceDocument Organization Where installation and setup information is located and how Setting Up OpenLane for FrameSaver Devices. IdentifiesSetting Up NetScout Manager Plus for FrameSaver Devices. Describes setup of the NetScout Manager PlusProduct-Related Documents Conventions Used When viewing this manual online. Click onTo indicate a hyperlink to additional information Highlighted textAbout the FrameSaver Flex System OverviewSystem Overview FrameSaver Flex Feature Sets Flex Flex SLV Feature Feature Set Basic AdvancedBasic Flex Features Maximum Number of PVCs and Management PVCs Supported 9123-A1-211 9123-A1-213 Feature 9123-A1-221 9123-A1-223Models Through Connections PVCs Dedicated Management PVCsJuly Advanced Flex SLV Features OpenLane SLM System NetScout Manager Plus and NetScout Probes About the FrameSaver Flex User Interface Basic Operation Logging On ProcedureIf your login was Then Main Menu SelectMain Menu Service Level Verification System Options Screen Work AreasScreen Format Description Navigating the Screens Keyboard KeysPress Select For the screen Press Enter to Function Function KeysSelecting from a Menu Switching Between Screen AreasSelecting a Field Entering InformationExample User Interface and Basic Operation Configuration Configuration Basic Configuration Configuration MenuConfiguration EDIT/DISPLAY Configuration Option Area Description Configuration Option AreasMain Menu → Configuration Accessing and Displaying Configuration OptionsConfiguration → PVC Connections Changing Configuration OptionsSaving Configuration Options Using the Easy Install Feature Main Menu → Easy InstallEasy Install Screen Example Default If the selection is Unit is configured to operateEntering System Information Setting the System Clock Setting Up So the Router Can Receive RIPConfiguration → Data Ports → Dlci Records Main Menu → Control → System InformationMain Menu → Auto-Configuration Setting Up Auto-ConfigurationAuto-Configuration Screen Example AUTO-CONFIGURATIONSelecting a Frame Relay Discovery Mode Main Menu → Auto-Configuration → Frame Relay Discovery ModeDiscovery Mode Configuration Description 9123-A2-GB20-10 July Automatically Removing a Circuit Setting Up Back-to-Back Operation Changing Operating ModeMain Menu → Control → Change Operating Mode Configuring the Overall System Configuration Option TablesMain Menu → Configuration → System → Frame Relay and LMI Configuring Frame Relay and LMI for the SystemSystem Frame Relay and LMI Options 1 LMI BehaviorLMI Status Enquiry N1 Possible Settings 1, 2, 3, 4 System Frame Relay and LMI Options 2Traffic Policing System Frame Relay and LMI Options 3 LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25Service Level Verification Options 1 Configuring Service Level Verification OptionsService Level Verification Options 2 SLV Timeout Clearing Event ThresholdSLV Packet Size bytes Configuring General System Options Main Menu → Configuration → System→ GeneralGeneral System Options Configuring the Network Interface Configuring the Physical InterfacesMain Menu → Configuration → Network → Physical Network Physical Interface Options 1Bit Stuffing Network Physical Interface Options 2Transmit Timing Network Initiated LLBNetwork Physical Interface Options 3 Network Initiated Dclb Possible Settings Disable, V.54&ANSINetwork Initiated PLB Ansi Performance Report MessagesCircuit Identifier Network Physical Interface Options 4Main Menu → Configuration → Data Ports → Physical Configuring the User Data PortData Port Physical Interface Options 1 Transmit Clock SourceData Port Physical Interface Options 2 Monitor RTS ControlPort DTE Initiated Loopbacks Main Menu → Easy Install → Time Slot Assignment Screen Assigning Time Slots/Cross ConnectionsAssigning Frame Relay Time Slots to the Network Interface Value Meaning Frame Relay Network Time Slot Assignment Screen ExampleTime Slot Assignment Rule Frame Relay Network 1 AssignmentSelect Frame Relay Network Assignments Assigning the Synchronous Data Port to Network Time Slots Synchronous Data Port Assignment Screen ExampleSync Data Port Assignment Clearing Assignments Interface Frame Relay Options 1 Configuring Frame Relay for an InterfaceLMI Parameters Interface Frame Relay Options 2Frame Relay DS0s Base Rate Interface Frame Relay Options 3Main Menu→ Configuration→ Network/Data Port→ Dlci Records Manually Configuring Dlci RecordsDlci Type Possible Settings Standard, Multiplexed Dlci Record Options 1CIR bps Dlci Record Options 2Committed Burst Size Bc Bits Excess Burst Size BitsDlci Record Options 3 Dlci PriorityOutbound Management Priority Configuring PVC Connections Main Menu → Configuration → PVC ConnectionsPVC Connection Options 1 Destination Link PVC Connection Options 2Destination Dlci Destination EdlciConfiguring Node IP Information Setting Up Management and Communication OptionsNode IP Options 1 Node IP Options 2 TS Access Management LinkNode IP Options 3 TS AccessConfiguring Management PVCs 10. Management PVC Options 1Name Primary Link Possible Settings Net1-FR1, Port-1, Clear 10. Management PVC Options 2Set DE 10. Management PVC Options 3 Primary DlciPrimary Edlci Name 1 Access Configuring General Snmp Management11. General Snmp Management Options 1 Snmp ManagementConfiguring Telnet and/or FTP Session Support 11. General Snmp Management Options 212. Telnet and FTP Session Options 1 12. Telnet and FTP Session Options 2 Inactivity Timeout12. Telnet and FTP Session Options 3 FTP Login RequiredDisconnect Time Minutes FTP SessionAccess Type Configuring Snmp NMS Security13. Snmp NMS Security Options NMS IP Validation14. Snmp Traps Options 1 Configuring Snmp TrapsSnmp Traps Number of Trap ManagersEnterprise Specific Traps 14. Snmp Traps Options 2Link Traps Possible Settings Disable, Up, Down, Both 14. Snmp Traps Options 3Rmon Traps Configuring the Ethernet Port 15. Ethernet Port Options 1Interface Status Proxy ARP 15. Ethernet Port Options 216. Communication Port Options 1 Configuring the Communication PortPort Use Character Length16. Communication Port Options 2 Login RequiredStop Bits Ignore Control Leads16. Communication Port Options 3 RIP 16. Communication Port Options 4External Modem Commands Configuring the COM Port to Support an External ModemDial-In Access 17. External Modem COM Port OptionsConfiguration Security and Logins Controlling Asynchronous Terminal Access Limiting AccessSet the configuration option Controlling Telnet or FTP Access Controlling External COM Port Device AccessLimiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Disabling Snmp Access Controlling Snmp AccessAssigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Creating a Login Main Menu → Control → Administer LoginsField Enter Deleting a Login Modifying a LoginOperation and Maintenance Displaying System Information Main Menu → Status → IdentityView this field To find Viewing LEDs and Control Leads Main Menu → Status → Display LEDs and Control LeadsDisplay LEDs & Control Leads Screen General Status LEDs 1 Label Indication Color What It Means LED DescriptionsNetwork Interface LEDs Label Indication Color What It Means General Status LEDs 2 Label Indication Color What It MeansUser Data Port LED Label Indication Color What It Means Control Lead DescriptionsAdditional Control Leads Label Indication What It Means Network InterfaceDevice Messages 1 What It Indicates What To Do Device MessagesSee Changing Software Device Messages 2 What It Indicates What To DoDevice Messages 3 What It Indicates What To Do Software Device Messages 4 What It Indicates What To DoChanges? prompt Device Messages 5 What It Indicates What To DoStatus Information Status MenuStatus Last System Reset Date and Time Self-Test Results Messages Last System Reset Date and TimeSystem and Test Status Messages Self-Test Results MessagesHealth and Status Messages 1 What It Indicates Health and Status MessagesFrame relay link Health and Status Messages 2 What It IndicatesFrame relay link 1, 2 Health and Status Messages 3 What It IndicatesTest Status Messages 1 What It Indicates Test Status MessagesTest Status Messages 2 What It Indicates Network LMI-Reported DLCIs StatusMain Menu → Status → LMI Reported DLCIs LMI-Reported DLCIs Status Screen ExampleNetwork LMI-Reported DLCIs Status Field What It Indicates Main Menu → Status → PVC Connection Status PVC Connection StatusPVC Connection Status Screen Example 10. PVC Connection Status 1 Field10. PVC Connection Status 2 Field What It Indicates Displaying Network Time Slot Assignments Time Slot Assignment StatusMain Menu → Status → Timeslot Assignment Status → Network Network Timeslot Assignment Status Screen ExampleCross Connect Status Field Indicates Bottom Main Menu → Status → IP Routing Table IP Routing TableIP Routing Table Screen Example 11. IP Routing Table Values 1 Column What It Indicates11. IP Routing Table Values 2 Column What It Indicates Main Menu → Status → Performance Statistics Performance StatisticsPerformance Statistics Menu Performance StatisticsPerformance Statistics → Clear All Statistics Clearing Performance StatisticsPerformance Statistics → Frame Relay Performance Statistics → ESF LineService Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Dlci Performance Statistics Main Menu → Status → Performance Statistics → Dlci13. Dlci Performance Statistics 1 What It Indicates CIR&EIR 13. Dlci Performance Statistics 2 What It IndicatesFrame Relay Performance Statistics Frame Relay ErrorsMain Menu → Status → Performance Statistics → Frame Relay 14. Frame Relay Performance Statistics 1 What It IndicatesFrame Relay Errors contd 14. Frame Relay Performance Statistics 2 What It IndicatesFrame Relay LMI 14. Frame Relay Performance Statistics 3 What It Indicates Frame Relay Hdlc ErrorsESF Line Performance Statistics Main Menu → Status → Performance Statistics → ESF LineTo select intervals You must enter an interval or time on ±LOFC±± ESF Line Performance Statistics Screen ExampleUAS Statistic What It IndicatesMain Menu → Status → Performance Statistics → Ethernet Ethernet Performance StatisticsMain Menu → Status → Trap Event Log Trap Event LogTrap Event Log Screen Example Trap Event LOGFTP File Transfers Dir directory Command DefinitionIf the message displayed is Then Upgrading System SoftwareChanging Software Determining Whether a Download Is CompletedIf retrieving Then Transferring Collected DataTroubleshooting Indicators See Problem IndicatorsResetting the Unit and Restoring Communication Resetting the Unit from the Control MenuResetting the Unit By Cycling the Power If selecting Following occurs Restoring Communication with a Misconfigured UnitTroubleshooting Management Link Feature LMI Packet Capture Utility FeatureMain Menu → Control → LMI Packet Capture Utility LMI Packet Capture Utility → Display LMI Trace Log LMI Trace Log ExampleLMI Trace LOG Alarm Conditions 1 What It Indicates What To Do AlarmsOperational appears Alarm Conditions 2 What It Indicates What To DoAlarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems Troubleshooting TablesDevice Problems 1 Symptom Possible Cause Solutions Viewing the Trap Event LogWith a Misconfigured Unit Device Problems 2 Symptom Possible Cause SolutionsFrame Relay PVC Problems Symptom Possible Cause Solutions Frame Relay PVC ProblemsTests Available Test Menu ExampleTest Test Timeout Feature When the status of a test is Only command available isStarting and Stopping a Test Aborting All Tests PVC Tests PVC Tests Screen ExampleNetwork PVC Tests Send Pattern PVC LoopbackMain Menu → Test → Network PVC Tests Main Menu → Test → Data Port PVC TestsConnectivity Monitor PatternPhysical Tests Screen Example Physical TestsMain Menu → Test → Network Physical Tests Line LoopbackPayload Loopback Repeater Loopback Send Line Loopback Data Channel Loopbacks on a Frame Relay Link Qrss Send and Monitor Pattern TestsMain Menu → Test → Data Port Physical Tests DTE LoopbackMain Menu → Test → IP Ping IP Ping TestProcedure Main Menu → Test → Lamp Test Lamp TestOpenLane Support of FrameSaver Devices OpenLane Support of FrameSaver DevicesSetting Up the OpenLane SLM System Setting Up FrameSaver Flex and SLV Support To Find Your License Key Number Ordering Flex SLV ActivationsActivation Certificate Administering and Managing Flex SLV Activations Checking Activation Certificate Status Entering an Activation CertificateScheduling Activations Cancelling Scheduled Activations Accessing and Printing the Certificate Summary ReportChecking the Status of Scheduled Activations July Setting Up NetScout Manager Plus for FrameSaver Devices Preparation AlarmsProperties User historyConfiguring NetScout Manager Plus Procedure Adding SLV Alarms Using a Template Editing Alarms 9123-A2-GB20-10 July Adding SLV Alarms Manually Paradyne Field Select or EnterCreating History Files Procedure Dvuhist -f Dallas51 3 config 30 60 Dallas51k.udh Installing the User-Defined History FilesMonitoring a DLCIs History Data July 9123-A2-GB20-10 July Monitoring the Agent Using NetScout Manager Plus Procedure Setting Up NetScout Manager Plus for FrameSaver Devices Setting Up Network Health for FrameSaver Devices Installation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports About Service Level Reports Generating Reports for a GroupAbout At-a-Glance Reports Reports Applicable to Flex and SLV Devices About Trend ReportsPrinted Reports July 9123-A2-GB20-10 July Setting Up Network Health for FrameSaver Devices Menus Menu HierarchyStatus Menu Hierarchy Frame Relay ModeEasy Install Auto-ConfigurationData Ports Assignment Menu Hierarchy Leased Line ModeControl Menu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults Downloading MIBs and Snmp Traps MIB SupportSystem Group mib-2 FrameSaver Units sysDescr systemFrameSaver Units sysObjectID system Paradyne Indexes to the Interface Table ifTable Interfaces Group mib-2Physical Layer Frame Relay Logical LayerNetScout Indexes to the Interface Table ifTable Rmon Logical LayerFor the DTE Examples Standards Compliance for Snmp TrapsTrap warmStart Trap authenticationFailureTable B-3. warmStart Trap What It Indicates Possible Cause Variable-BindingTraps linkUp and linkDown MIB Physical SublayerLogical Link Sublayer Physical Sublayer contdDevHealthAndStatus Traps enterprise-SpecificSLVs devFrExt.mib Placeholder Traps RMON-Specific Event Defaults Rmon Alarm and Event DefaultsEventIndex EventDescription EventType EventCommunity Rising Event OperationPhysical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Dlci Alarm Defaults ± Paradyne Area Dlci Alarm Defaults ± NetScout Area Rx Dlci Link Object ID Cross-References Numeric Order 6.1.2.1.2.2.1 6.1.2.1.2.10.32.2.16.1.4.1.1795.2.24.2 Dlci CIR 6.1.4.1.1795.2.24.2.6.9.46.1.4.1.1795.2.24.2.6.9.4.4.2 Dlci EIR6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.5.2.16.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Rear Panel Connectors, Cables, Pin AssignmentsCanadian T1 Line Interface Cable Feature No -F1-510 T1 Network Cable Feature No -F1-500T1 Network Interface Function Circuit Direction Pin NumberSignal Direction Pin # COM Port ConnectorPin Standard EIA-232-D Crossover CableAT Command String To configure the modem to Signal Data Port ConnectorStandard V.35 Straight-through Cable Direction Pin SocketEthernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications T1 Network Interface COM PortEthernet Port Data PortFrameSaver Flex SLV Upgrade Description Model / Feature NumberEquipment List EquipmentOptional Features Description Part Number Feature NumberCables NMS ProductsNumbers IndexIN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9 IN-10

Related manuals

Manual 166 pages 36.17 Kb

Manual 271 pages 14.3 Kb