Insertion of Batteries
-Turn the remote control upside down, press and slide off the battery cover.
-Insert two 1.5V (AAA) batteries into the compartment, take care to observe the
⊕ and ⊖ markings indicated inside.
-Replace the cover and slide in reverse until the lock snaps.
Range of Remote Control
-Ensure the remote control is pointed towards the Remote control window on the display unit.
-No obstacles should be placed between the remote control and the remote control window.
-The effective receiving range for the signal is within
Sketch map
20° 
20°
30° 30°
Care For Remote Control
-Avoid spilling liquids on the remote.
-Avoid dropping or otherwise jarring the remote.
-Always store the remote control at dry and normal room temperature place.
-If the remote is nor performing satisfactorily, replace the batteries. The batteries should be replaced after one year.
-If the remote control will be idled for a long time (above 1 month) take out the batteries to avoid leakage from the batteries.
-Clean up the entire remote control especially the battery compartment if any leakage found.
-Do not mix using different kind of new and used batteries together to avoid leakage.
15