Operating Instructions
■ Using the “Channel Skip”
1 Press Menu button, and then press or button until the “TV” menu appears.
2 Press or button to highlight the item.
3Press or button to “On” or “Off”, when select “On” the channel is skipped.
4Press Menu or Exit button to
return.
■Using the “Channel Name”
1 Press Menu button, and then press
or button until the “TV”
menu appears.
2 Press or button to highlight the item.
3Press Enter button to confirm, it will display “Channel Name” list.
4Use , , or button for select, and move cursor to “OK”,
then press Enter button for confirm you selection. If you want to cancel this operation, move cursor to “Cancel” and press Enter button for close this setting.
5 Press Menu or Exit button to return.
Note: It will be invalid if the current source is not TV.
■Selecting Channel
1 Press CH +/- button on the remote control to search the channels, the channel numbers will increase or decrease by 1 for each pressing excluding the skipped channels.
2Press number buttons 0~9 to select the corresponding channel content. If the channel number is bigger than 9, just press the two number buttons successively. If the channel number is bigger than 100, just press the three number buttons successively. The time interval should not exceed 2 seconds.
36