Scott LCT37SHA manual Setting of V-Chip

Operating Instructions

■Setting of “V-Chip”

Some programs and movies include signals that classify the content of the program (dialog, language, sex, violence). The “V-Chip” control feature in this detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup.

Adjustment only for TV, DTV, AV, S-VIDEO input signal. 1 Press Menu button, and then press

or  button until the “Setup”

menu appears.

2 Press  or  button to highlight the item.

3Press Enter button to confirm.

The “V-Chip” menu includes the “V-Chip Enable”, “Block MPAA Rating”, “Block TV Rating”, “Block MPAA Unrated”, “Block TV None Rating” and “Change Password” functions. You can use these functions after entering the correct PIN code.

Entering the PIN code ▪Blocking Reset status:

Set your 4-digit code by pressing the Number buttons (0~9), and then press Enter.

▪When the PIN code is already stored:

Press the Number buttons (0~9) to enter the 4-digit PIN code used for blocking channels, and then press Enter.

Note: The initial password for the system is “0000”.

If you had forgotten the password, please contact with service centre.

If the input is invalid, a message will pop up as below;

28