Scott LCT37SHA manual Basic Operation, Power ON/OFF, Selection of Input Mode

Page 21

Operating Instructions

6. Basic Operation

6.1 Power ON/OFF

The Display is in Standby mode.

-Press the Standby on the remote control or on the control panel to turn on the unit. The power indicator changes from red to green.

-Press the Standby on the remote control or on the control panel again to return the display to standby mode.

The power indicator changes from green to red.

Note: For protecting your LCD TV product, the interval time between turn on the LCD TV product and shut down it should be kept at least one minute.

Standby

Source

6.2 Selection of Input Mode

- Press Source on the remote control or on the LCD TV control panel to select the signal source you desired.

When no input from the selected

signal source, “No signal” will appear, press Source on the remote control or on the control panel again to search the next source.

Note:

The LCD-TV will automatically turn itself off after approximately 15 minutes if no signal input. When no signal is inputted for about 14 minutes. A “No signal and going to power down” wording will appear.

20

Image 21

Contents Page Safety Guidelines Examples Important SafeguardsPage Operating Instructions Page Operating Instructions Precaution Contents Open the Package Before useSupplied Accessories Product FeaturesSide View Names and Functions of PartsFront View VOL.+4 5 6 7 Rear ViewMute Remote Control~9 Number Buttons In TV Source Color Buttons Range of Remote Control Care For Remote ControlInsertion of Batteries Connect Accessory Devices  Connecting a DVD player or other equipment Connecting the Computer  Connecting Audio Output Jacks to a stereo amplifier  Connecting SPDIFOptical terminal to a stereo amplifier  Connecting the DVD or VCR player devices Connect to antenna Atsc DTV & Ntscatv input connection configPower ON/OFF Selection of Input ModeBasic Operation Freeze Other FunctionSleep Add/EraseOSD Option Adjustment SourceEnter Menu Adjustment of Contrast Using the Video MenuAdjustment of Brightness Adjustment of SaturationAdjustment of Hue Adjustment of SharpnessSelection of Phase setting Selection of Advance Picture Adjust Selection of Color TemperatureUsing the Audio Menu Adjustment of BassAdjustment of Treble Adjustment of Balance Using the Setup MenuSelection of Surround Selection of LanguageSetting of V-Chip Press  or  button to highlight the Change Password item Children TV Ratings General TV RatingsChip Block TV-PG Content CategoriesPress  or  button to highlight the Block Mpaa Unrated item On-screen Selection of Closed CaptionSelection of Blue Back Using DefaultUsing the Tuner Mode Using the TV MenuAnalogUsing the Searching Using the TVUsing the Channel Skip Using the Channel NameSelecting Channel Using Contrast Using the Geometric MenuUsing Brightness Channel PreviewUsing Color Temperature Using Auto SettingUsing Phase Using Display Adjustment Using Manual ClockUsing the General Menu Using the DTV MenuDigitalPage Using the Caption Menu Page Black. You can change the background color of the caption Setting of ParentalEPGElectronic Program Guide Does not display any data when the current channel Pattern LCT37SHA Technical SpecificationSupport the Signal Mode Cleaning of Housing and Remote Control Cleaning Simple TroubleshootingSymptoms Possible Solutions