Scott LCT37SHA manual Press  or  button to highlight the Change Password item

You can press Enter button to display “Input Your Password Please” menu again, then entering the PIN code, or press ,, or  button move cursor to “Cancel” and press Enter button to close up this menu.

✿Using the “Change Password” item 1 When enter the “V-Chip” menu, select “Change Password”.

2 Press  or  button to highlight the “Change Password” item.

3 Press Enter button to confirm.

4 Press Number buttons (0~9) to enter the 4-digit PIN code to change the password, then use  button move to Confirm item, enter the 4-digit PIN code again.

5Press Enter button to confirm.

Note:Please operate “Change Password” at the first time.

✿Using the “V-Chip Enable” item 1 When enter the “V-Chip” menu,

select “V-Chip Enable”.

2 Press  or  button to highlight the “V-Chip Enable” item.

3 Press  or  button to select “On” or “Off”.

On: The V-Chip setting functions are activate.

Off: The V-Chip setting functions are not activate.

4Press Menu or Exit button to return.

✿Using the “Block MPAA Rating” item

1 When enter the “V-Chip” menu,

select “Block MPAA Rating”.

2 Press  or  button to highlight the “Block MPAA Rating” item.

3 Press Enter button to confirm.

4 Press  or  button to select an item, then press Enter button to lock (display“”) or unlock (display “”).

29