Unisen 265 Series Sound, continued, Sound Global, Auto SP, Sound SoundPro, 50 4. TV Menus, Stereo

504. TV Menus

Sound, continued

Sound Mode	Stereo	No special audio effects from the TV speakers
	Surround	Modifies audio from the TV speakers.
		• For monaural (non-stereo) programs, creates a simulated stereo effect.
		• For stereo programs, creates a simulated surround sound effect.
		• The TV’s speaker array plays surround sound if available.
	Music	Optimizes the TV’s speaker array for music listening.
	Night	Focuses the TV’s speaker array to a single point to limit sound heard by others
		outside the room. Press ENTER to adjust the focal point (Night Angle).
Level Sound	On, Off	Reduces differences in sound volume between programming segments, such as the
		difference between regular broadcast programs and commercial segments.
Listen To	Stereo	The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
(applies only		Stereo is displayed when you tune to a channel broadcasting in stereo.
to analog
	Mono	Reduces background noise. Use when receiving a weak stereo audio signal. All
channels from
		audio is played as mono.
the ANT input)
	SAP	Selects an additional monaural sound track not audible during normal TV viewing.
	(Second Audio	The SAP signal might be related to the program (such as a sound track in a foreign
	Program)	language), or it might be unrelated (such as a weather report). If an SAP signal is
		broadcast, the letters SAP are displayed when you tune to the channel.

Sound Global

Settings in this menu apply to all inputs.

Analog Audio Out

These settings affect audio from the AVR/SURROUND OUTPUT jacks.

Fixed	Use with an analog A/V receiver. Control volume from the A/V receiver. The
	volume of the audio output signal is fixed and is unaffected by the TV’s volume
	control.
Variable	Use with headphones. Adjust headphone volume using the TV’s volume controls.
	When set to Variable, the audio output signal is adjustable from the TV’s volume
	controls.
Rear	Sends left and right rear audio to external speakers. Use when supplementing the
	TV’s speaker array with external rear speakers. See “External Rear Speakers,” page 41.

Subwoofer	Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer is connected.
Center Channel	On allows the TV’s speakers to complement your external sound system as a center channel. Set
	to Off if not in use.

Sound	Auto SP
	265 Series. Performs auto calibration of the Sound Projector speaker array. See “Auto
	Setup,” page 40.

Sound SoundPro

Lets you set up the Sound Projector speaker array manually. See page 38.

DownloadedFor assistanceFrom TV-Manualcall.com1(800)Manuals 332-2119