Unisen 154 Series manual Appendix D TV Care, Cleaning Recommendations, Care of the Remote Control

Page 84
84Appendices

84Appendices

Appendix D: TV Care

Cleaning Recommendations

Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines:

First, turn off the TV and unplug the power cord from the power outlet.

Occasionally clean dust build-up from the air-intake grilles on the back and sides of the TV. Clean using a vacuum cleaner with a brush attachment.

Top and Sides of the TV

Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel, microfiber, or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.

For oily dirt, add a few drops of mild liquid deter- gent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moistened only with water. Dry with a third dry, soft, non-abrasive cloth.

Screen

IMPORTANT

DO NOT apply any type of liquid to the surface of the TV screen.

Use only a soft, dry cloth to clean the LCD screen. Do not use any liquids.

Wipe the screen gently with an up and down motion.

Clean the entire screen evenly, not just sections of the screen.

General Cleaning Precautions

DO NOT allow liquid to enter the TV through the ventilation slots or any crevice.

DO NOT use any strong or abrasive cleaners, as these can scratch the surfaces.

DO NOT use any cleaners containing ammonia, bleach, alcohol, benzene, or thinners, as these can dull the surfaces.

DO NOT spray liquids or cleaners directly on the TV’s surfaces.

DO NOT scrub or rub the TV harshly. Wipe it gently.

DownloadedFor assistanceFrom TV-Manualcall.com1(800)Manuals 332-2119

Care of the Remote Control

Remote Control Tips

For longer life, use alkaline batteries.

Do not mix old and new batteries.

Be within 20 feet of the equipment.

Do not press two or more keys at the same time unless instructed to do so.

Do not allow the unit to get wet or become heated.

Keep the unit out of direct sunlight.

Avoid dropping on hard surfaces.

Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.

Resetting the Remote Control

If TV mode is selected and the TV does not respond properly, reset the remote control.

1.Press and hold POWER for several seconds until the mode indicator blinks twice and goes off.

2.Release the POWER key.

3.Press keys 0 0 9 3 5 and the mode indicator will blink twice when you finish entering the code. When entering the code, pause for a moment between each key press to ensure it is recognized.

Low-Battery Indicator

If you press a key and the mode indicator blinks five times, replace the remote control’s batteries.

Image 84
Contents MODELS Downloaded From TV-Manual.com Manuals154 Series 164 Series 265 Series OWNER’S GUIDEFCC Declaration of Conformity Contents Basic Setup and OperationTV Features 5 NetCommand IR ControlInstallation and Operating Notes Important Information About Your TVTV Software Children and TV ViewingReplacement Parts Outdoor Antenna GroundingImportant Safety Instructions Stand Installation CAUTION. Place theDO support the TV under the cornersWall-Mounting Stand Removal Prior to Wall-MountingSpecial Features of Your TV 1080p High-Definition LCD Display SystemEasy Connect Auto Input Sensing True120Hz and True240Hz1 Basic Setup and Operation Package ContentsInstalling the Remote Control Batteries Remote ControlFirst-Time Power-On 10 1. Basic Setup and OperationSee the stand-installation or wall-mounting TV power connectionRemote Control 1. Basic Setup and OperationTV Controls Number/letter keys12 1. Basic Setup and Operation TV Controls, continuedThe TOOLS Key and Menu TOOLSPOWER Indicator POWERSystem Reset TV is powered off. Normal operationSetting Up TV Inputs Using the ANT Antenna InputSetting Up Inputs with Auto Input Sensing 14 1. Basic Setup and OperationSetting Up TV Inputs, continued When You First Connect a DeviceAbout Auto Input Sensing Auto Input Sensing for Most Devices16 1. Basic Setup and Operation TV Connected to an Antenna or Direct Cable Service no cable boxCANCEL Basic TV OperationPicture Settings When to UseChanging Audio Settings TV Speakers Only Basic TV Operation, continuedMore TV Features 18 1. Basic Setup and OperationFeature The FORMAT Key and Picture ShapeUsing the TV with a Personal Computer Connecting a Computer to the TVvideo signals only. This TV is not HDMI ConnectionUsing the TV with a Personal Computer Computer Video AdjustmentsImage Resolution 20 1. Basic Setup and Operation2 TV Connections Connection Types and Audio/Video QualityAuto Input Sensing Connection Types265 Series NetCommand/ IR external controller jack. See page LAN Install the supplied cable ties in any of four mounting holesInstalling the cable tie Inputs and Outputs9. USB Power Only Inputs and Outputs, continued1. ANT Antenna 2. HDMI Inputs High-Definition Multimedia InterfaceHDMI Device 12. AVR/SURROUND OUTPUT13. SUBWOOFER OUTPUT 14. CENTER CH INPUTIncoming from cable service or satellite dish Y Pb Pr Component Video DeviceDVI Video Device Commonly used with a Cable Box, Satellite Receiver, or DVD PlayerAntenna or Cable TV Service VCR or DVD Recorder to an Antenna or Wall Outlet CableComposite Video Device VCR or other device with composite video outputA/V Receiver A/V Receiver with HDMI OutputA/V receiver back panel DVD playerUsing the TV Speakers as a Center Channel Wireless SubwooferPower-only USB port USB/USB mini-plug power cable RCA/RCA audio cable Supplemental Audio Connections3 TV Features Sleep TimerSetting the Sleep Timer Viewing or Changing the Sleep TimerUsing ChannelView Listings Using Custom Channel Banks30 3. TV Features Press CANCELSignal Definitions 3. TV FeaturesStatus Display INFOUsing an External Sound System Controlling A/V Receiver Sound Volume32 3. TV Features Disconnecting an A/V Receiver480i/480p and SD 43 signals Eliminates top and 720p, 1080i, SD 169, and HD signals EliminatesPicture Shape and Display Formats Format Definitions34 3. TV Features SetupNotes on Using the USB Port Camera Images and Music FilesUsing the Photos and Audio Menus USB Media Setup MenuCamera Images and Music Files, continued For Photos or Audio TracksUsing an Audio-Only Device 36 3. TV FeaturesCamera connection using a composite video cable Photos and Motion Video as Composite VideoWireless Audio Playback Pairing the TV with an Audio Playback DeviceBluetooth icon in Input Selection Menu Resetting Bluetooth Pairing or ConnectionBasic Manual Setup 38 3. TV FeaturesConnecting the TV Sound Projector3. Adjusting Beam Angles 4. Adjusting Levels5. Adjusting an External Subwoofer How to Make Adjustments in the Custom MenuAuto Setup Microphone Placement40 3. TV Features Start Auto SetupConnecting the transmitter to the TV Sound Projector adjustments when using external rear speakersExternal Rear Speakers TransmitterHome Network Setup 42 3. TV FeaturesRouter or modem providing high-speed internet service Setup Network, DHCP connectionWireless Connection USB wireless adapterSetup Network menu, manual connection StreamTV Internet Media, continuedUsing StreamTV Internet Media TroubleshootingUsing VUDU Apps and VUDU Movies 44 3. TV FeaturesRemote Control Programming Any Connection Type CEC-Enabled HDMI Device HDMI Connection Only265 Series. NetCommand IR Control Any Connection Type CEC-Enabled HDMI A/V Receiver46 4 TV Menus Main MenuPicture PicturePicture, continued Picture+4. TV Menus BrightnessPicture Reset to make adjustmentsUsing PerfectColor Using PerfecTintTo return to the default values for Advanced adjustmentSound Sound AudioSound, continued Sound GlobalAuto SP Sound SoundProServices Serviceanalog when audio from the TV speakers is muted. While watching TV Caption signals sent by the broadcasterSetup Setup LanguageSetup Clock Setup TimerSetup, continued Setup ChannelAdding/Deleting Channels Using the Channel Edit Menu Ant Air Ant CableSetup Energy Setup NetworkWireless Connection Network ID 54 4. TV MenusIf case of CEC conflicts Turn off CEC signals in one of these ways InputsInputs Name InputsInputs, continued Inputs OrderInputs Demo 56 4. TV MenusSetting a Pass Code Resetting a Pass CodeLock TV LocksContent Lock, continuedLock Parental 58 4. TV MenusLock Time Lock ChannelLock Panel Lock Other60 5 NetCommand IR Control About NetCommand IR ControlNetCommand IR home-theater control is avail- able on 265 series TVs Important Note on NetCommandPlacement 5. NetCommand IR Control 265 Serieshighlight IR-NetCommand Output The New Device Found screen displays when you connect the IR emitterNetCommand Setup Initial NetCommand SetupNetCommand and Device-Specific Keys 62 5. NetCommand IR Control 265 SeriesNetCommand Setup, continued Operating NetCommand-Controlled DevicesAdding or Removing Device Keys from NetCommand Control Controlling Most Device TypesOperating NetCommand-Controlled Devices, continued 64 5. NetCommand IR Control 265 SeriesSpecial Operation Description and Setup How to UseCancel CANCEL as the Cancel or Exit FunctionEnter digits separatorNetCommand Specialized Device Keys 66 5. NetCommand IR Control 265 SeriesPower On or Power ON/OFF toggle Cancel or erase menusControlling an A/V Receiver after NetCommand Setup Switching Audio to and from the A/V ReceiverControlling A/V Receiver Power Power and volume. See the next pageSetting Up A/V Receiver Control Power and Volume68 6. NetCommand Control of an A/V Receiver 265 Series Setup to Control A/V Receiver Power and VolumeSetting Up A/V Receiver Control, continued Automatic Audio/Video Switching Over an HDMI Connection6. NetCommand Control of an A/V Receiver 265 Series More About Using an HDMI Connection70 6. NetCommand Control of an A/V Receiver 265 Series Setup to Control Automatic Audio and Video Switching via HDMIBefore You Begin NetCommand Control of a Device Con- nected to an HDMI A/V Receiver 6. Open the Inputs Learn menuAppendix A Programming the Remote Control Appendix E TroubleshootingAppendix B Bypassing the Parental Lock Appendix C HDMI Control of CEC Devices Appendix D TV CareAppendix A Programming the Remote Control POWERVOLUME CANCEL on some models CHANNEL UP/DN for track skip on some modelsAppendix A Programming the Remote Control, continued Programming the Remote ControlStop, VOLUME UP, or MUTE 2. Press keys 9 9 3 VOLUME UPAudio Accessories Video AccessoriesAppendices75 Audio Amplifiers76 Appendices Satellite ReceiversVCRs Appendices77 78 Appendices Blu-ray and HD-DVDAppendix B Bypassing the Parental Lock Mitsubishi Home Theater TVBypassing the Parental Lock Appendices79This page intentionally left blank 80 AppendicesTo use HDMI Control, you must enable it in both the TV and the device Appendix C HDMI Control of CEC DevicesEnabling HDMI Control of CEC Devices Has No HDMI Control OptionAppendix C HDMI Control of CEC Devices, continued HDMI Control of an HDMI A/V Receiver and Connected Devices82 Appendices HDMI outputUsing HDMI Control CEC-enabled VCR, DVD, and DVR functions that may be availableCEC-enabled A/V receiver functions that may be available Resolving CEC ConflictsCleaning Recommendations Care of the Remote ControlGeneral Cleaning Precautions Remote Control TipsAppendix E Troubleshooting TV Reset Comparison GuideService and Customer Support Reset NameAppendix E Troubleshooting, continued A/V Resetsee the Setup Channel Edit System ResetSymptom Appendices87VUDU General TV OperationTV Power On/Off 88 AppendicesTV Channels Appendices89 Picture90 Appendices SoundCheck that DIGITAL AUDIO OUTPUT and/or AVR/SURROUND NetCommand IR Control NetCommand-equipped models only Appendices91Trademark and License Information 92 Trademark and License InformationMitsubishi TV Software Trademark and License InformationEND-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE 2. RIGHTS AND LIMITATIONSGNU GENERAL PUBLIC LICENSE 94 Trademark and License Information800 332-2119. A nominal handling and mailing charge may apply Version 3, 29 June4. Conveying Verbatim Copies 5. Conveying Modified Source Versions6. Conveying Non-Source Forms 7. Additional Terms96 Trademark and License Information 15. Disclaimer of Warranty9. Acceptance Not Required for Having Copies 10. Automatic Licensing of Downstream RecipientsGNU General Public License Version 2, JuneGNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION98 Trademark and License Information NO WARRANTYMitsubishi LCD Flat Panel HDTV Limited Warranty Warranty991. TO OBTAIN WARRANTY SERVICE 2. THIS LIMITED WARRANTY DOES NOT COVERNetwork Service Disclaimer 100 WarrantyIndex 102 Index Downloaded From TV-Manual.com Manuals To order replacement or additional remote controls MDEAservice@mdea.comSYSTEM RESET Website