Unisen 265 Series Resolving CEC Conflicts, Using HDMI Control, Appendices83, Go to Inputs Name

Appendices83

Appendix C: HDMI Control of CEC Devices, continued

Resolving CEC Conflicts

Because each manufacturer selects which CEC func- tions to support, some devices can conflict with other devices. If control conflicts arise, you can:

•Turn off TV control of an individual CEC-enabled device (see below).

•Turn off CEC in the setup menu of one of the devices.

Turning Off the TV’s HDMI Control of a CEC Device

1.Press MENU on the TV remote control.

2.Highlight Inputs > HDMI Control.

3.Move to the device name and press ENTER to select Off to turn off the TV’s ability to control the device.

4.Press EXIT to clear the menu.

Inputs > HDMI Control menu

Removing an HDMI Device

1.Power off the device.

2.Disconnect the HDMI cable.

3.Press MENU on the TV remote control to enter the TV main menu.

4.Go to Inputs > Name.

5.Highlight the HDMI input name and press ENTER to select Delete.

6.Press EXIT to clear the menus.

Using HDMI Control

As an example of using HDMI Control, press PLAY on the device itself to:

•Power on the TV

•Switch to the device (no need to display the Input Selection menu)

•Begin play of the device

Direct Keys

Test your equipment with the TV’s remote control to find additional supported commands. See the table below for commands that may be available, depending on the individual device.

CEC-enabled VCR, DVD, and DVR functions that may be available:

Record/	Menu	Channel	Other
Playback	Navigation	Tuning
		CH	Guide
	Enter	Digits 0–9,	TOOLS
		CANCEL	Check the
			TOOLS menu
	CANCEL
		ENTER	for supported
	(to cancel)		functions.

If you have a CEC-enabled A/V receiver, CEC-enabled devices connected to the A/V receiver with an HDMI cable may also be controllable. They can be selected from the TV’s Input Selection menu.

CEC-enabled A/V receiver functions that may be available:

•Try the VOL, MUTE, and menu-navigation keys.

•To open the A/V receiver menu, follow these steps:

1.While watching TV, press AUDIO.

2.Press until the TV Speakers option displays.

3.Press to select Off (to send audio to the A/V receiver).

4.Press INPUT and highlight the A/V receiver icon in the Input Selection menu.

5.Press TOOLS.

6.Select Menu from the Tools menu.

Inputs > Name menu with Delete selected for HDMI-3.

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119