Connecting Other Equipment
When no other equipment is to be connected, proceed to Chapter 3 “Watching TV” 
page 24). You can start enjoying TV programs right away.
SET UP
VIDEO 1 input
This input is used for connecting an S1 VIDEO jack to optional equip- ment having an S VIDEO terminal. e.g.) Video camera, DVD player, VCR, etc. with an S jack
VIDEO 2 input
This input is used for connecting optional equipment by AV cable. e.g.) VCR, TV game machine, video camera, etc.
VIDEO 3, 4 input
This input is used for connecting op- tional equipment with a component video jack.
e.g.) Digital tuner, DVD player, etc.
Audio output
This output is used for recording audio from the TV or for connecting to an external amplifier.
HDMI 1, 2 input
This input is used for connecting optional equipment with an HDMI jack.e.g.) Digital tuner, etc. When connecting from a DVI source, connect the Audio cable too.
* About connection cables
Connections are also made using the cables specified for the various equipment (e.g. video camera) to be connected. For details on how to make connections, refer to the User’s Manual for the respective equipment.
To S VIDEO input jack Commercially available
Yellow
White
Red
Green
Blue
Red
White
Red
White
Red
Note
• Before connecting optional equipment, be sure to turn this TV and the optional equipment off.
• The plugs and jacks for video and audio connections are
• Connect only video and audio signals to the video and audio jacks. Do not connect other signals. Doing so may cause malfunction.
• For details on how to use and connect equipment, refer to the User’s Manual of the respective equipment.
• Connection Precautions
20
• Insert plugs as far as they can go. Incomplete connections cause noise.
• When unplugging plugs, do not pull on the cord. Hold cords by their plugs.
• To prevent mutual interference when two or more pieces of equipment are connected, turn equipment that is not in use off.
• If noise appears in the video or audio of the TV and connected equipment, move the equipment away from the TV.