Notes on Use (continued)
Recommendations (continued)
Avoid direct sunlight or steam.
•Do not install this product in direct sunlight or near heating equipment. Doing so may adversely influence the chassis or compo- nents.
•Leaving this product in locations such as vehicles with closed windows that become excessively hot may deform the chassis or cause this product to malfunction.
Avoid using this product in rooms and locations subject to sudden changes in temperature.
•Doing so may impair the definition of the display.
Use in low-temperature rooms and locations
•If this product is installed in a cold room or location, smears may appear in the picture or the picture may be delayed on screen. This is not a malfunction. These phenomena improve as room temperature is restored.
•Do not install this product in locations where the temperature will drop. Doing so may de- form the chassis or cause the LCD screen to malfunction. Recommended operating temperature: 0 to 40C
Condensation
•If this product is suddenly transfered from a cold to a warm location or if the room tem- perature changes suddenly (e.g. by turning on the heating on a winter’s morning), con- densation (water droplets) may form on its surface or inside. Continued use in this condi- tion may cause malfunction. If condensation occurs, wait a while for the condensation to disappear before plugging the power cord into the power outlet.
INTRODUCTION
Caution
9