Uniden TL27WRA-B, TL42WRA-B, TL42WRA-W, TL32WRA-B Setting Panorama or Zoom Display Wide Mode

Setting Panorama or Zoom Display (WIDE MODE)

The display screen can be switched to the Full, Normal, Panorama, and Zoom screen modes.

WATCHING TV

						WIDE MODE
			1			Press the	button.
						This sets the	screen to the Normal screen
	MUTE			POWER		mode.
						Each press of this button switches the input
						as follows:
	SLEEP	DISPLAY	TV/VIDEO
					WIDE MODE
WIDE MODE		AUDIO		HDMI

Full screen Normal screen

Zoom screen Panorama screen

Reference

•When you select another channel, the screen mode will revert back to the default setting. The default screen type can be set with “Screen Setup” ([finger] page 38) in the menu screen.

•In the Panorama screen mode, 4:3 aspect ratio images are expanded to naturally fill the entire screen.

•In the Normal screen mode, a black band containing no image appears on the left and right of the picture.

•Panorama display cannot be selected when the video format is 720p/1080i.

•The same settings can also be made with “Screen Setup” ( page 38) in the menu screen.

Notice

•About the Auto-wide Switching Function

The auto detection switching function is activated when WSS or ID-1 type aspect

ratio information is detected in the video signal.
	Aspect ratio	Operation
4:3		Same as the Standard mode setting in the
		menu screen. (	page 38)
	Letter Box	The screen display mode is Zoom.
	16:9	The screen display mode is Full.

28