Connecting Other Equipment (cont’d)
Arranging the cables
Pass the cable through the notch in the cover. (The cover can also be removed.)
SET UP
About connector covers
•Removal
Press down here.
Pull this way.
27 and 32 inch models:
Press down on the lip at the top and pull towards you to remove it.
•Installation
37 and 42 inch models:
Press on the two tabs on the right and pull towards you to remove it.
cover tabs
27 and 32 inch models:
Insert the two protrusions at the bottom into the holes on the body, and press in the top until it is locked in place. Next, press in the center section to lock the protrusions on the left and right.
22* Take care not to pinch the cords.
cover tabs 
37 and 42 inch models:
Align the three tabs on the left into the holes on the body and press the into the left side until it is locked in place. Next, press the right section to lock in the right side tabs.