Emprex HD-3701P Analogue and Atsc digital signals from, Channel 2 to channel 69. The percentage

Page 45

The steps required to automatically program the product are outlined as below:

1.Press or keys to the CHANNEL and enter the password (Default: “0000”).

You will see three sub-menus:

Edit

Auto Scan

Manual Scan

2. Press or button to highlight AUTO

SCAN and then press “OK” to launch

the auto scan. The AUTO-SCAN win-

dow shows the SCAN status.

3. The scanning will search for both NTSC

analogue and ATSC digital signals from

channel 2 to channel 69. The percentage

bar shows the progress made.

4. Once the digital TV signal is scanned,

the channel number and the program

name will be shown on the “Scan List”.

5. It takes about three minutes to complete

the scanning process.

6. When the scanning is complete, press

Channel Caption

Password

Channel Caption

Edit

Auto Scan

Manual Scan

Channel Caption

Setup Lock

Setup Lock

Setup Lock

“EXIT” to leave this window or press

“DTV MENU” to exit the menu system.

Auto Scran

03-0 OFF-AIR

05-0 OFF-AIR

02-1 SBC2-D1

02-2 SBC2-D2

23-0 OFF-AIR

30-3 PBS1DTV

6 channels found.

Auto Scan complete. Press (Menu) Key to exit

44

Image 45

Contents Model Number HD-3701P Setting Up Your Television Before Using This ProductDTV Setup and Connections Introduction Your TelevisionSetting Up the DTV About This Manual CopyrightTrademarks Canada Class B Statement FCC ComplianceDo not use this apparatus near water and moisture Ground Clamps Risk of Electric Shock Do not Open Page Page Distance recommendations Cleaning the screenFollowing items come along with your LCD TV Button Above AAA VOL Table below explains each button’s functionHdmi LCD R MTS Hdmi Source AV1 AV2 DVD player Source AV1 LCD TV Source AV1 AV2 Atsc Component Source AV1 AV2 Video Mode Video Audio Screen Options Chip Press Use or to Custom Press to contrast and press OKor to selectMode How to set the parameters in the video mode menuBalance How to set the parameters in the audio menuDisplay Mode How to set the parameters in the screen menuUser might also choose panoramic Display ModesAdding and Erasing Channels TV/CATV Blue Screen How to set the parameters in the options menuChip Unrated Program Change Password How to set the parameters in the V-Chip menuSetting Up TV Rating Limits That is highlighted Means that the selection can Setting Up Movie Rating LimitsChanging the Password Mpaa Movie Rating Descriptions TV Rating Descriptions Main mode Atscant Channel Initial ScreenKey and then select Channel to run Once the digital TV signal is scanned Analogue and Atsc digital signals fromWhen the scanning is complete, press Channel 2 to channel 69. The percentageMemorizing Channel Manually Press the OK key on no to can- cel the change Edit ChannelFont Size Aption Closed-Caption OptionsFont Style Closed Caption Background ColorClosed Caption Foreground Opacity Closed Caption Background OpacityEdge Style Edge ColorFormat Screen Format Setup SetupScreen Formating and Aspect Ratios TV Type ResolutionAspect Ratio SelectOpacity Changing the Transpar Ency of the On-Screen-Display Sound Digital Audio Output Set TingTime Zone Plate Changing the Display Time Information-PlateAbout Lock Mpaa Movie Rating Descriptions NAB TV Rating DescriptionsResetting the Data to Default Changing the PasswordAudio System Dolby 5.1 or PCM -Program Rating Information Now Current EPGMTS/Audio Extended Program InformationPress the EPG button to display the EPG window Channel GuideClosed Caption There is just noise There is no picture or soundColor abnormal or improper Picture is too brightPossible Solution SDTV/HDTV Hdmi input Chip menu block Size, H position- screen menu Horizontal Prog- TV controls program VOL- remote control/TV control Volume ONE Year Limited Warranty Parts No -4T562