Emprex HD-3701P There is no picture or sound, There is just noise, Color abnormal or improper

Page 62

Read this section to learn how to maintain and troubleshoot your LCD TV.

Problem

Possible Solution

There is no picture or sound.

1.Make sure the power plug is properly connected to the power outlet.

2.The channel may not have been scanned and can be re-scanned again from the setup OSD menu.

3.Make sure you have selected the correct input mode.

There is just noise.

1. The antenna reception strength may be weak.

2. Reposition the antenna's placement.

3. Make sure the antenna cable is properly connected to the LCD TV set.

Color abnormal or improper.

1. Check the color adjustment in the OSD video menu. (Refer to page 27)

Picture is too bright.	1.	Check the brightness setting; it may
		be set too high.
	2.	Check the "Backlight" setting in the

OSD options menu. The Backlight setting is to adjust the screen's backlight with respect to the environment's lighting.

Picture is too dark.

1. Check the brightness and contrast level setting from the OSD video menu.

2. Check the "Backlight" setting in the OSD options menu.

61

Image 62

Contents Model Number HD-3701P DTV Setup and Connections Before Using This ProductSetting Up Your Television Introduction Your TelevisionSetting Up the DTV Trademarks About This ManualCopyright FCC Compliance Canada Class B StatementDo not use this apparatus near water and moisture Ground Clamps Risk of Electric Shock Do not Open Page Page Cleaning the screen Distance recommendationsFollowing items come along with your LCD TV Button Above AAA Table below explains each button’s function VOLHdmi LCD R MTS Hdmi Source AV1 AV2 DVD player Source AV1 LCD TV Source AV1 AV2 Atsc Component Source AV1 AV2 Video Mode Video Audio Screen Options Chip Use or to Custom Press to contrast and press OKor to select PressHow to set the parameters in the video mode menu ModeHow to set the parameters in the audio menu BalanceHow to set the parameters in the screen menu Display ModeDisplay Modes User might also choose panoramicAdding and Erasing Channels TV/CATV How to set the parameters in the options menu Blue ScreenChip Unrated Program How to set the parameters in the V-Chip menu Change PasswordSetting Up TV Rating Limits Setting Up Movie Rating Limits That is highlighted Means that the selection canChanging the Password TV Rating Descriptions Mpaa Movie Rating DescriptionsMain mode Atscant Key and then select Channel to run ChannelInitial Screen When the scanning is complete, press Analogue and Atsc digital signals fromOnce the digital TV signal is scanned Channel 2 to channel 69. The percentageMemorizing Channel Manually Edit Channel Press the OK key on no to can- cel the changeFont Style Aption Closed-Caption OptionsFont Size Closed Caption Background ColorEdge Style Closed Caption Background OpacityClosed Caption Foreground Opacity Edge ColorSetup Format Screen Format SetupAspect Ratio ResolutionScreen Formating and Aspect Ratios TV Type SelectSound Digital Audio Output Set Ting Opacity Changing the Transpar Ency of the On-Screen-DisplayPlate Changing the Display Time Information-Plate Time ZoneAbout Lock NAB TV Rating Descriptions Mpaa Movie Rating DescriptionsChanging the Password Resetting the Data to DefaultNow Current EPG Audio System Dolby 5.1 or PCM -Program Rating Information Extended Program Information MTS/AudioChannel Guide Press the EPG button to display the EPG windowClosed Caption Color abnormal or improper There is no picture or soundThere is just noise Picture is too brightPossible Solution SDTV/HDTV Hdmi input Chip menu block Size, H position- screen menu Horizontal Prog- TV controls program VOL- remote control/TV control Volume ONE Year Limited Warranty Parts No -4T562