Watching TV
Turning On/Off the Power
POWER
POWER (On/Standby)
Initial Installation
When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.
1.Insert the batteries into the remote control unit. (See page 11.)
2.Connect the antenna cable to the TV. (See page 11.)
3.Plug in the AC cord to the AC outlet. (See page 10.)
Press POWER on the TV or on the remote control unit to turn the power on.
•The Power LED on the TV lights up.
•The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 35.
Press POWER on the TV or on the remote control unit again to turn the power off.
•The TV enters standby and the image on the screen disappears.
•The Power LED on the TV turns off.
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
•Weak electric power is still consumed even when the TV is turned off.
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1Press a/b to select the desired language listed on the screen, and then press ENTER.
Language |
|
|
|
Location & Time |
|
|
|
TV Location |
| English | |
|
|
| |
Antenna & Cable/STB |
| Français |
|
Air/Cable |
| Español | |
CH Search |
|
|
|
Completed |
|
|
|
|
|
|
|
Location & Time
Make settings for the country, area and time zone where you use the TV.
2Press a/b to select "United States" or "Canada", and then press ENTER.
United States
Canada
3Press a/b to select the time zone where you are using the TV, and then press ENTER.
Example
EST
CST
MST
PST
Alaska
Hawaii
•The time zone differs depending on the selected country.
•The factory preset value is the time zone for the capital of the selected country.
19