Fujitsu Siemens Computers P42-2H, P50-2H manual Sound menu sound settings

		MYRICA P42-1AH / P42-2H / P50-2H
Geometry	With these functions you set the position and the synchronisation of the
(in PC mode only)	picture display.
	To set the picture display, first use the Auto function and correct the picture
	display and, if necessary, then with the other functions.
	These functions are only available when PC is selected as the signal
	source.
	H Position	With this function you set the horizontal picture
		position.
	V Position	With this function you set the vertical picture position.
	Phase	With this function you fine-tune your display to
		eliminate picture interference.
	Auto	With this function you optimally set the picture display
		automatically.

SOUND menu - sound settings

►Press the MENU button to open the OSD menu.

►Mark the SOUND menu item with the / buttons.

►Press the MENU button to activate the menu item.

The buttons available to you for setting the options are shown in the menu footer.

Balance	With this function you set the balance between the left and the right
	loudspeaker.
Sound-Mode	With this function you activate the sound mode.
	The bass level and frequency of the sound are automatically set to
	optimum values depending on the sound mode.
	Possible values: Standard, Movie, Music, User.
Spatial Effect	With this function you switch the Surround sound mode on or off.
	Possible values: On, Off

A26361-K1064-Z120-1-M119 edition 2 English - 25