Fujitsu Siemens Computers P50-2H Troubleshooting, Having this problem? Check the following points

MYRICA P42-1AH / P42-2H / P50-2H

Troubleshooting

Should an error occur, first check the following points. If the distortion is still not eliminated, the plasma TV should, if possible, be checked on another signal source and/or with another data cable.

If you are unable to solve the problem, please inform our help desk.

Having this problem?	Check the following points:
No display (power indicator does not light)	► Check whether the power cable of the
	device is properly plugged in and the
	ON/OFF switch on the back of the device
	is switched on.
Display becomes darker	The phosphorous illumination has a limited
	lifetime. If your screen display should become
	too dark, it will have to be exchanged.
	► Please contact our help desk.
Permanently unlit or lit pixels	The standard of production techniques today
	cannot guarantee an absolutely fault-free
	screen display. A few isolated constant lit or
	unlit pixels may be present. The maximum
	permissible number of this kind of defective
	pixels is dependent on the resolution:
	6L / 10D / 10T
	L = light, D = dark, T = total
No picture (power indicator glows orange)	► Switch on the plasma TV on the device or
	with the remote control.
	► Check the setting of the picture signal
	source.
The remote control does not work.	► Check whether the batteries in the
	remote control are still sufficiently
	charged.
	► Make sure that the sensor for the remote
	control on the plasma TV is not exposed
	to strong light.

40 - English A26361-K1064-Z120-1-M119, edition 2