Fujitsu Siemens Computers P42-2H VESA-DDC-compatible VGA interface, Preset operating modes PC

MYRICA P42-1AH / P42-2H / P50-2H

VESA-DDC-compatible VGA interface

Your plasma TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the plasma TV and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your plasma TV and select the appropriate settings.

Preset operating modes (PC)

The following are the most frequently used of the preset operating modes:

Resolution	Refresh rate
640 x 350	70 Hz
640 x 480	60 Hz, 72	Hz, 75 Hz
800 x 600	56 Hz, 60	Hz, 72 Hz
1024 x 768	60 Hz, 70	Hz, 75 Hz
1280 x 720 *)	60 Hz, 75 Hz
1280 x 768 *)	60 Hz, 75 Hz
1280 x 1024 *)	60	Hz

*) not with MYRICA P42-1AH

Power consumption

To save energy when the device is temporarily not in use, the plasma TV can be switched into the standby mode with the remote control (POWER button) or the STANDBY button.

		Switched on	Standby mode
	Power indicator	lights green	lights red
	Function	Device operates normally	the screen is dark
	Power consumption	normal < 400 W (P42-1AH)	reduced to < 5 W
		normal < 450 W (P42-2H)	reduced to < 3 W
		normal < 500 W (P50-2H)	reduced to < 3 W
i	If the device is switched into the standby mode, a power consumption of up to 5 W is
	maintained to enable operation with the remote control.

To completely switch off the power consumption, switch off the device with the ON/OFF switch (see "Switching plasma TV on/off")..

A26361-K1064-Z120-1-M119 edition 2 English - 35