Fujitsu Siemens Computers P42-2H, P50-2H manual Setup menu advanced settings

MYRICA P42-1AH / P42-2H / P50-2H

SETUP menu - advanced settings

►Press the MENU button to open the OSD menu.

►Mark the Setup menu item with the / buttons.

►Press the MENU button to activate the menu item.

The buttons available to you for setting the options are shown in the menu footer.

Translucent	With this function you set the transparency of the OSD menu
	Possible values: Off, 1 - 7
PIP	(Picture In Picture)
	With this function you switch the PIP mode on or off.
	Possible values: On, Off
	When the PIP mode is activated, the following options are available:
	Size	Here you set the picture format for the PIP display.
	Resource	Here you set which signal source is displayed in the
		PIP display.
	Picture Swap	With this function you exchange the signal sources
		of the main display and the PIP display.
	Position	Here you set the position of the PIP display.
	A description of the	PIP mode is also provided under "PIP mode (Picture in
	Picture)" and "Selecting signal source for PIP display".

A26361-K1064-Z120-1-M119 edition 2 English - 27