Fujitsu Siemens Computers P50-2H, P42-2H PIP mode Picture in Picture, Main display, Scart PIP

MYRICA P42-1AH / P42-2H / P50-2H

PIP mode (Picture in Picture)

The plasma TV can also display a sub-video signal in addition to the main video signal. The sub- video signal is shown as a "PIP display" in a window on the main display.

The following buttons of the remote control are available for setting the PIP mode.

►Press the ON/OFF button to activate the PIP mode.

►Press the SOURCE button to select the source from which the signal for the PIP display is to come.

►Press the SIZE button to set the size of the PIP display.

►Press the POSITION button to set the position of the PIP display.

►Press the SWAP button to exchange the size and position of the main display with those of the PIP display.

►Press the POP button to display the main display and the PIP display in the same size next to each other.

►If a TV signal is displayed in the PIP display, you change to the next programme in the programme list with the PR+ button, and to the previous programme in the programme list with the PR- button.

Depending on which source the signal for the main display comes from, you can use certain sources for the signal of the PIP display.

The following combination options are available to you:

Signal					Main display
sources
		TV	AV	SV	SCART 1	SCART 2	VGA	DVI	YPbPr
	TV
	AV		-	-
display	SV		-	-
	SCART 1				-
PIP
	SCART 2					-
	VGA						-	-	-
	DVI						-	-	-
	YPbPr						-	-	-

32 - English A26361-K1064-Z120-1-M119, edition 2