To delete a single learned button:
1Press the mode button that you want to remove the learned button from.
2Press and hold SET until the LED blinks twice, then release.
3Enter 9 7 6. The LED blinks twice.
4Press the button containing the learned function to be deleted, twice. The LED blinks twice and programming ends.
Deleting all learned buttons in a specific mode
Note
If more than 10 seconds pass between button presses, the remote exits programming.
If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.
To delete all learned buttons in a specific mode:
1Press and hold SET until the LED blinks twice, then release.
2Press 9 7 6. The LED blinks twice.
3Press a mode button twice (for example, TV, DVD, STB, or AUX) to clear all the learned buttons for that mode. The LED blinks twice and programming ends.
Changing volume lock
Volume Lock sets the volume and mute buttons to the device you select, regardless of what mode you are in. For example, if you lock the volume to your DVD player and then go to TV mode, when you press the volume button on your Insignia remote, the volume will change on the DVD player and not on your TV.
To lock volume control:
1Press and hold SET until the red LED blinks twice, then release.
2Enter 9 9 3, the LED blinks twice.
3Press the mode button for the device you want to control (for example, TV).
4The LED blinks twice. Now when you press VOL+,
To unlock all volume control:
1Press and hold SET until the red LED blinks twice, then release.
2Enter 9 9 3, the LED blinks twice.
3Press VOL+. The LED blinks four times. Volume is independently controlled for all programmed devices.
To unlock a single device’s volume control:
1Press the device mode button (TV, DVD, STB, or AUX).
2Press and hold SET until the red LED blinks twice, then release.
3Enter 9 9 3. The LED blinks twice.
4Press
Programming channel lock
Channel control can be locked so that the Insignia remote controls a single device’s 
, CH 
, and RECALL.
To lock all channel controls to one device:
1Press the mode button for the device that you want to use for changing channels, such as STB for your cable set top box.
2Press and hold SET until the mode LED blinks twice, then release.
3Enter 9 7 3.The mode LED blinks twice.
4Press CH 
once. The mode LED blinks twice.
Now, regardless of what mode you select, the channel buttons will only change channels on the assigned device.
To unlock channel locks:
1Press and hold SET until the mode LED blinks twice, then release.
2Enter 9 7 3. The mode LED blinks twice.
3Press CH 
once. The mode LED blinks four times.
Now the channel functions will correlate to the active mode (for example, press CH 
in TV mode and the TV changes channel accordingly).
Using buttonmover
Your Insignia universal remote control includes a buttonmover feature that lets you copy buttons from one mode (such as source mode) to another mode (such as destination mode) or to a different button in the same mode.
Note
Do not use any of the Device buttons, 
(power),
RECORD, or SET as a source or destination button.
To move buttons in the same device mode:
1Press the device button (TV, DVD, STB, or AUX).
2Press and hold SET until the LED blinks twice, then release.
3Press 9 9 4. The LED blinks twice.
4Press the button you want to move.
5Press the new button that should perform the function. The LED blinks twice.
6Repeat Steps
To move buttons to a different device mode:
1Press and hold SET until the LED blinks twice, then release.
2Press 9 9 4. The LED blinks twice.
3Press the device button that contains the function you want to move (for example, DVD).
4Press the button you want to move (such as Play).
5Press the device button that you want to move the function to (such as TV).
12 | www.insigniaproducts.com | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|