Adjusting component video

NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 23 Thursday, January 21, 2010 10:20 AM

32"/37"/42" LCD, 120 Hz 1080p

• Backlight—Controls the overall brilliance	3 Press to highlight Component Settings, then
of the screen. You can adjust the backlight	press OK/ENTER or . The Component Settings
through a range of 0 ~ 30.	screen opens.

•Advanced Contrast—When you see the

pop-up menu, set Adaptive Contrast to
On to adjust picture detail and brightness	PICTURE	AUDIO CHANNELS SETTINGS USB
automatically or to set Dynamic Contrast	Settings Component Settings
Ratio to On to automatically adjust the	Phase	50
contrast between the light and dark areas	Reset Component Settings
of the picture.

•Reset Picture Settings—Resets all picture settings to the factory defaults. When you select this option, a confirmation box opens.

Press or to select Yes or No, then press	MOVE ENTER SELECT MENU	PREVIOUS EXIT	EXIT
	OK
OK/ENTER to confirm.	Minimizes horizontal distortion

3Press or to adjust the option, or press or

to select a setting.

4 Press MENU to return to the previous menu, or	4 Press	or to highlight an option, then press
press EXIT to close the menu.	or	to adjust the option. You can select:
Adjusting component video	• Phase—Minimizes horizontal distortion.
	(0 ~ 100)

Note

This setting is available only when the video input source is set to Component and your TV is receiving a component signal.

To adjust component video:

1Press MENU. The on-screen menu opens.

PICTURE	AUDIO CHANNELS SETTINGS USB
Picture
Mode	Energy Savings
Brightness	50
Contrast	48
Color	70
Tint	0
Sharpness	0

OK	MENU PREVIOUS	EXIT EXIT
MOVE ENTER SELECT

Adjust settings to affect picture quality

2Press or to highlight SETTINGS. The Settings menu opens.

PICTURE AUDIO CHANNELS SETTINGS USB

Settings

Parental Controls

Closed Caption

Time

Menu Settings

Auto Input SensingOn Input Labels

MOVE	OK	MENU PREVIOUS	EXIT EXIT
	ENTER SELECT
Set various TV options

•Reset Component Settings—Resets component settings to the factory defaults.

5Press MENU to go to the previous menu or press EXIT to close the menu.

Adjusting the computer image

To adjust the computer image:

1Make sure that your TV is in VGA mode. For more information, see “Selecting the video input source” on page 20.

2Press MENU. The on-screen menu opens.

PICTURE	AUDIO CHANNELS SETTINGS USB
Picture
Mode	Energy Savings
Brightness	50
Contrast	48
Color	70
Tint	0
Sharpness	0

OK	MENU PREVIOUS	EXIT EXIT
MOVE ENTER SELECT

Adjust settings to affect picture quality

3Press or to highlight SETTINGS. The Settings menu opens.