Insignia NS-37L550A11 manual Programming a different universal remote, Control, Programming macros

NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 13 Thursday, January 21, 2010 10:20 AM

32"/37"/42" LCD, 120 Hz 1080p
6 Press the button in the new mode that should			To program a mode-dependent macro:
perform the function (for example, Play). The			1 Press the device mode button (TV, DVD, STB, or
LED blinks twice.			AUX).
7 Repeat Steps 1-6 to move additional buttons.			2 Press and hold SET until the LED blinks twice,
To restore all buttonmoved data in a specific			then release.
			3 Press 9 7 8. The LED blinks twice.
mode:
1 Press and hold SET until the LED blinks twice,			4 Press the button you want to assign to a macro.
then release.			5 Enter the series of commands you want the
2 Press 9 9 4. The LED blinks twice.
			macro to execute (up to 15 commands).
3 Press the device button you want to remove all			6 Press and hold SET until the red LED blinks
buttonmoved data from twice. The LED blinks			twice, then release.
twice.			Now, when you press the macro button, the
4 Repeat for each device you want to restore.
			remote sends the series of commands you have
To restore original button function:			entered, but only if you are in the mode you
			selected in Step 1. For example, you could
1 Press the device button for which you want to			program the macro button to turn on both your
remove the buttonmoved data from a specific			TV and cable box and select a particular
button.			channel, but only if you are in TV mode. If you
2 Press and hold SET until the LED blinks twice,			are in DVD mode, this button does not execute
			the macro you set up in TV mode.
then release.
3 Enter 9 9 4. The LED blinks twice.
				Note
4 Press the button you want to remove the					To clear the macro, repeat Steps 1-6, but do not enter
buttonmoved data from twice. The LED blinks					a series of commands at Step 5.
twice.			Programming a different universal remote
5 Repeat Steps 1-4 for additional buttons you
			control
want to remove.
			You can operate your Insignia TV with a new or
Programming macros
			existing universal remote control.
Your Insignia universal remote control includes the
			To program a different universal remote control:
ability to program any button (other than the SET
button) with a macro function. Each one can be set			1 See the table below for common codes. If you
up to perform a pre-programmed set of sequential			have problems programming your remote or
button presses with the press of a single button. A			need a different remote control code, visit
macro can be used to control a home theater			www.insigniaproducts.com for the latest
operation, to set a favorite channel, or for other			remote control code information.
functions you would like to control with one button
press. Each macro button can hold up to 15 button			Insignia TV codes for universal remote controls
presses, total.			(for all Insignia TVs manufactured after Jan. 1, 2007)
				Universal remote control makes and models
	Note
		Programming a new macro over an existing one	Philips PHDVD5,		RCA	One for All	Sony
		erases the original macro.	PH5DSS,		RCU807	URC-6690	RM-VL600
To program a mode-independent macro:			PMDVR8, PDVR8
			115	135		0464	8043
1 Press and hold SET until the red LED blinks
twice, then release.
					Set-top box makes and models
2 Press 9 9 5. The LED blinks twice.
			Comcast	Dish Network		Motorola	TIVO	DirectTV
3 Press the button you want to assign to a macro.
			M1057	VIP508, VIP622		DRC800	Series 3, HD	RC23
4 Enter the series of commands you want the
			0463	720		0463	0091	10463
macro to execute (up to 15 commands).
5 Press and hold SET until the red LED blinks
twice, then release.			Codes for other remote controls are available
Now, when you press the preset macro button,			online at: www.insigniaproducts.com
the remote sends the series of commands you
				Tips
have entered, regardless of what mode you are
in. For example, you could program a macro					• The brand name is often visible on the front of
					the universal remote control, and the model
button to turn on both your TV and cable box
					number is often visible on the back.
and select a particular channel.
					• If your universal remote control isn’t listed on
					the chart, refer to your universal remote
	Note
					control’s instructions and try codes for the
		To clear the macro, repeat Steps 1-5, but do not enter			brands Orion, Emerson, Memorex, Sansui,
		a series of commands at Step 4.			Sylvania, or Zenith. You may need to try several
					codes before finding a match.

www.insigniaproducts.com 13