DirecTV HBH-SA, SD-HBH manual Getting Started, Setup overview

Getting Started

1

You may connect a second DIRECTV Receiver to the unused LNB output. These instructions also apply to an additional receiver.

Setup overview

This chapter explains how to:

•Connect the DIRECTV® Satellite Dish Antenna to your DIRECTV Receiver (this page).

•Connect your DIRECTV Receiver to your TV (see page 3).

•Find antenna azimuth and elevation settings for your location (see page 4).

•Test the DIRECTV System operation (see page 5).

How to use this manual

This manual uses these typographical conventions to help clarify instructions:

Text Example	Description
Click Cancel.	On-screen command buttons that execute an action.
Highlight the Messages	Selections or other option buttons within a menu
button.	pane.
Press the INFO button.	Remote control buttons, or receiver front panel.
Connect a pair of A/V	Names of equipment cable connections on
cables to the AUDIO IN jack.	equipment.
Highlight the Options tab.	Menu tab names.
Display the MAIN MENU.	Menu and pane names, names of pop-up and
	sub-menu panes.

At this point, you should have:

•Mounted the DIRECTV Satellite Antenna and pointed it in the general direction of the satellite.

•Grounded the antenna as described in your antenna installation instructions.

•Attached RG-6 coaxial cable(s) to the antenna LNB connector(s).

•Routed the other end of the antenna cable to the back of your DIRECTV Receiver.

•Placed the DIRECTV Receiver accessible to a telephone modular jack.

•Inserted the access card into your DIRECTV Receiver.

Ensure that you have completed these procedures, then continue to the next page to begin installing the DIRECTV Receiver.

Getting Started 1