Humax IR-ACE M manual GB28, Output Setting, Audio Output, Screen Mode

Page 29

Main Menu Guide

A/V Output Setting

The A/V Output Setting menu supplies menus that configure the functions related to Audio and Video output.

Configure the Audio output of RCA (Cinch) Jack as Mono or Stereo mode.

Configure the screen aspect ratio (4:3 or 16:9) of the TV connected to STB.

Configure the video display format (Centre or Letter-box) on the TV.

Configure the RF modulator.

Configure the NTSC mode. There are two NTSC modes, NTSC

3.58and NTSC 4.43. The NTSC 3.58 is more popular. According to the TV type, select the suitable NTSC mode.

Audio Output

To configure the audio output mode of RCA jack, proceed as follows:

1.Activate the A/V Output Setting via the Main menu.

2.Select the Audio Output item using the button.

3.Select the desired audio output using the button. There are two modes: STEREO and MONO.

4.Press the OK ( ) or EXIT ( ) button to confirm.

Screen Mode

To configure the TV screen mode, proceed as follows:

1.Activate the A/V Output Setting via the Main menu.

2.Select the Screen Mode item using the button.

3.Select the desired TV screen mode according to the connected

TV using the button. There are two modes: 16:9 and 4:3.

4.Press the OK ( ) or EXIT ( ) button to confirm.

GB28

Image 29
Contents Page Contents Liquids SafetyGlossary Copyright & GlossaryCopyright References Connecting a Satellite antennaDiSEqC 1.0 Connection DiSEqC 1.2 ConnectionSoftware Upgradeing Front Panel STB Connections+ Model IR-ACE M only Model IR-ACE M onlyRear Panel RF OUT RS-232CTV with Terrestrial antenna TV only with RCA / CinchWith a Hi-fi System GB10GB11 TV with Motorised System DiSEqCGB12 Remote Control Unit18 V-/V+ GB13Information Function Guide Service PartInformation Box I-Plate GB14Teletext Service Changing ServicesVolume Control GB15GB16 SoundtrackSubtitle Configuration Service Service ListAll Service GB17Service Network Service FavouriteService Alphabetical GB18Main Menu Guide Quick GB20GB21 Now modeGB22 Weekly modeGB23 Reserved modeQuick mode GB24 Language Setting System SettingGB25 Menu LanguageGB26 Time SettingSubtitle Language Current TimeGB27 Wakeup Service NoWakeup Time Sleep TimeScreen Mode Output SettingGB28 Audio OutputDisplay Format GB29UHF Tuning Ntsc ModeOther Setting GB30Menu Mode Service OrganisingGB31 OSD TransparencyGB32 Organise TV ServicesOrganise All Services GB33 GB34 Organise Favourite ServicesGB35 Organise Radio ServicesGB36 GB37 GB38 Organise Networks GB39Delete Satellites GB40GB41 Service SearchingAntenna Setting Manual Search GB42GB43 Guide of Main Menu Symbol Rate tableoptionalGB44 Automatic SearchGB45 StatusGB46 Conditional AccessVersion Information Smart card InformationMonitoring EMM/ECM Mail MessagesGB47 Setting your Receiver for DiSEqC Satellite Setting Menu OptionsMotorised System GB48Initial Satellite Position Search Motor Limit SettingGB49 Manual Satellite Search GB50Moving to a pre-set satellite Searching for services on your selected SatelliteGB51 GB52 GB53 Troubleshooting GuideGB54 Menu MapGB55 Specification Physical Specifications Power SupplyData In/Out GB57