Main Menu Guide
Manual Search
The function of the Manual Search menu is to search services in one transponder using information from a satellite transponder. (If the Network Search option is enabled, services in other transponders are searched).
The following items are supplied as parameters:
Antenna Alternative
Specifies the antenna used for searching.
Frequency
Sets the frequency of a transponder.
Polarisation
Sets the polarisation type (horizontal or vertical).
Symbol Rate
Sets the symbol rate of a transponder.
FEC(Forward Error Correction)
Sets the FEC value of a transponder.
Network Search
Enables/disables the network search option. If the option is enabled, all services in other transponders may be searched according to information in the NIT.
Automatic Skip
Enables/disables the automatic skip option. If this option is enabled, the scrambled services are skipped during the search.
BAT Search
Some operators define the order of services in a list using BAT. If this option is enabled, the services will be ordered according to the BAT information.