Humax IR-ACE M manual Status, GB45

Page 46

3-4. Status

The function of the Status menu is to supply users with information on several STB statuses, such as:

Information on the Software version,

Information on the Hardware version,

Information on the signal level of the current locked TP,

Information on OTA availability.

This information is mainly intended for operators or installers.

STB Status

The STB status menu supplies information on the software and hardware versions.

To receive the information, proceed as follows:

1.Activate the Status Menu via the Main menu.

2.Select the Status menu using the button, then press the OK ( ) button to enter the menu.

3.Press the EXIT ( ) button to exit the menu.

Signal Detection

The Signal Detection menu supplies information on signal level and signal quality.

This can be used when the antenna is adjusted to the desired satellite as the signal level and quality are maximally high when the antenna is pointed directly at the satellite.

To receive the information, proceed as follows:

1.Activate the Status Menu via the Main menu.

2.Select the Signal Detection menu using the button, then press the OK ( ) button to enter the menu.

3.Press the EXIT ( ) button to exit the menu.

STB Upgrade

The OTA can be performed via the STB Upgrade menu.

If there is an available OTA image on the air, the menu may be selected. Otherwise, the menu is greyed out and cannot be selected.

Loader Status

The Loader Status menu supplies information on the loader status.

GB45

Image 46
Contents Page Contents Safety LiquidsCopyright Copyright & GlossaryGlossary DiSEqC 1.0 Connection Connecting a Satellite antennaReferences DiSEqC 1.2 ConnectionSoftware Upgradeing STB Connections Front PanelModel IR-ACE M only + Model IR-ACE M onlyRear Panel RS-232C RF OUTWith a Hi-fi System TV only with RCA / CinchTV with Terrestrial antenna GB10TV with Motorised System DiSEqC GB11Remote Control Unit GB12Information GB1318 V-/V+ Information Box I-Plate Service PartFunction Guide GB14Volume Control Changing ServicesTeletext Service GB15Subtitle SoundtrackGB16 All Service Service ListConfiguration Service GB17Service Alphabetical Service FavouriteService Network GB18Main Menu Guide GB20 QuickNow mode GB21Weekly mode GB22Quick mode Reserved modeGB23 GB24 GB25 System SettingLanguage Setting Menu LanguageSubtitle Language Time SettingGB26 Current TimeWakeup Time Wakeup Service NoGB27 Sleep TimeGB28 Output SettingScreen Mode Audio OutputGB29 Display FormatOther Setting Ntsc ModeUHF Tuning GB30GB31 Service OrganisingMenu Mode OSD TransparencyOrganise All Services Organise TV ServicesGB32 GB33 Organise Favourite Services GB34Organise Radio Services GB35GB36 GB37 GB38 GB39 Organise NetworksGB40 Delete SatellitesAntenna Setting Service SearchingGB41 GB42 Manual SearchGB43 GB44 Symbol Rate tableoptionalGuide of Main Menu Automatic SearchStatus GB45Version Information Conditional AccessGB46 Smart card InformationGB47 Mail MessagesMonitoring EMM/ECM Motorised System Satellite Setting Menu OptionsSetting your Receiver for DiSEqC GB48GB49 Motor Limit SettingInitial Satellite Position Search GB50 Manual Satellite SearchGB51 Searching for services on your selected SatelliteMoving to a pre-set satellite GB52 Troubleshooting Guide GB53Menu Map GB54GB55 Specification Data In/Out Power SupplyPhysical Specifications GB57