3-3. Service Searching
Antenna Setting
The Antenna Setting menu sets the characteristics of each antenna. 32 antennae can be supported, one of which for SMATV.
The Antenna Setting menu supplies the following items to characterise the antenna.
Antenna Alternative
Assigns an index to each antenna. Hence, the value is unique for each antenna. It can assign up to 32 indexes.
Satellite Name
Assigns a satellite name to each antenna. The available satellite names supplied by default can be used. Moreover, the satellite name can be defined by the user with the “User Defined” item.
LNB Frequency
Assigns LNB frequency of LNB in each antenna. It can be set
as “Universal”, “5150”, “9750”, “10600”, “10750” and “11475”. It can also be set as any value using the numeric buttons.
22KHz Tone
Disables/enables the 22KHz tone in the signal line.
DiSEqC Input
It sets the DiSEqC input to select a proper antenna.
It can be set as “Tone Burst A”, “Tone Burst B”, “DiSEqC A”, “DiSEqC B”, “DiSEqC C” and “DiSEqC D”.
Motorised System
Disables/enables the motorise function.
LNB Power
Switches/off the LNB power.
LNB Voltage
Sets the LNB voltage level. The LNB voltage may drop too low to supply power to the LNB due to the long length of the signal cable. To compensate the voltage drop, the item should be set on “High”.