Guide of Main Menu
Manual Search
Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder.
The bar on bottom of the submenu shows the signal quality(BER) of the entered parameters.
Antenna Alternative
Select the target antenna for Manual Search.
The Satellite Name helps you select Antenna Alternatives.
This is only for reference and cannot be changed on this menu.
Frequency
Use the Numeric buttons(0~9) on the remote control unit.
Polarisation
Use the | buttons to select the Polarisation of the transponder. |
(Auto, Horizontal, Vertical) | |
• Horizontal : 18 V are output through LNB line | |
• Vertical | : 13.5 V are output through LNB line |
Symbol Rate
Inputs the Symbol Rate of the transponder you want to find.
Use the 
buttons or Numeric buttons on the remote control unit.
FEC (Forward Error Correction)
Use the 
buttons to select the Forward Error Correction of the transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6 and 7/8.
Network Search
•You can select Yes or No. When you select “Yes”, you can find more transponders using the home network.
•As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponder besides the transponder that the user inputs.
Automatic Skip
•You can select Yes or No. When you select “Yes”, the search will skip all scrambled services.
•When the found services are scrambled during searching, they are not listed up.
Refer to descriptor of PMT whether it is scrambled or not.