Humax Digital Set-Top Box manual Changing Services, Teletext Service, Volume Control, GB13

Page 14

If you press the HELP ( ) button while the I-Plate is displayed, the detailed description of the event will be displayed on the help window instead of help messages. If there is no available data for the detailed description on the air, the help message is displayed on the help window instead.

ChangingServices

There are several ways to change a service.

Use the NUMERIC buttons: key in the service number using the

NUMERIC buttons and press the OK ( ) button. If the OK ( ) button is not pressed, the service is automatically changed to the service number keyed in after about 5 seconds.

Use the buttons: the service is changed up/down

sequentially if the button is pressed.

Use the buttons: the service is changed up/down

sequentially if the button is pressed.

Use the service list or Guide list: refer to the following description.

Use the RCL () button: return to the latest viewed service when the RCL () button is pressed.

There are two types of service, TV and RADIO.

To switch between them, press the TV/RADIO button.

To change a service in the service list or guide list, proceed as follows:

1. Activate the service list or guide list.

(Refer to the following GB15, 17 pages on how to activate them)

2.Select the desired service using the button.

3.Press the OK ( ) button, and the service is changed to the desired one.

TeletextService

The TELETEXT ( ) icon appears on the I-Plate if there is available teletext data in the service.

(NOTE: The TV supports the teletext decoder internally for watching it, since the teletext data is decoded by the TV.)

VolumeControl

To adjust the volume level, use the button or the button. To mute the audio, press the MUTE () button. To recover the

audio level, press the MUTE ( ) button again, or the , button.

GB13

Image 14
Contents Digital Set-Top Box with Irdeto embedded Contents Safety LiquidsGlossary Copyright & GlossaryCopyright DiSEqC 1.0 Connection Connecting a Satellite antennaReferences DiSEqC 1.2 ConnectionSoftware Upgradeing STB Connections Front PanelRear Panel RS-232CWith a Hi-fi System TV onlyTV with VCR TV with VCR and Motorised System DiSEqC Remote Control Unit GB10Information 18 V-/V+Information Box I-Plate Service PartFunction Guide GB12Volume Control Changing ServicesTeletext Service GB13GB14 SoundtrackSubtitle All Service Service ListConfiguration Service GB15Service Alphabetical Service FavouriteService Network GB16Main Menu Guide GB18 QuickNow mode GB19Weekly mode GB20GB21 Reserved modeQuick mode GB22 GB23 System SettingLanguage Setting Menu LanguageSubtitle Language Time SettingGB24 Current TimeWakeup Time Wakeup Service NoGB25 Sleep TimeVideo Output CVBS/S-Video/RGB Output SettingGB26 Audio OutputDisplay Format Screen ModeGB27 GB28 Ntsc ModeOther Setting GB29 Service OrganisingMenu Mode OSD TransparencyGB30 Organise TV ServicesOrganise All Services GB31 Organise Favourite Services GB32Organise Radio Services GB33GB34 GB35 GB36 GB37 Organise NetworksGB38 Delete SatellitesGB39 Service SearchingAntenna Setting GB40 Manual SearchGB41 GB42 Symbol Rate tableoptionalGuide of Main Menu Automatic SearchStatus GB43Version Information Conditional AccessGB44 Smart card InformationMonitoring EMM/ECM Mail MessagesGB45 Motorised System Satellite Setting Menu OptionsSetting your Receiver for DiSEqC GB46Initial Satellite Position Search Motor Limit SettingGB47 GB48 Manual Satellite SearchMoving to a pre-set satellite Searching for services on your selected SatelliteGB49 GB50 Troubleshooting Guide GB51Menu Map GB52GB53 Specification Data In/Out Power SupplyPhysical Specifications GB55