Humax Digital Set-Top Box References, DiSEqC 1.0 Connection, DiSEqC 1.2 Connection, Loop Via

Page 5

References

1. DiSEqC 1.0 Connection

All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennae to be connected to the STB simultaneously.

If you have two or more fixed antennae or LNBs, you can use a DiSEqC 1.0 switch.

1.Connect the coaxial cable from the first LNB to the LNB 1 or LNB A DiSEqC switch input connector.

2.Connect the coaxial cable from the second LNB to the LNB 2 or LNB B DiSEqC switch in put connector.

3.Do the same for the other LNBs.

4.Connect one end of a Coaxial cable to the RF DiSEqC switch output connector and the other end to the LNB IN socket on the STB.

2. DiSEqC 1.2 Connection

Please refer to page GB46.

3. Connecting a Satellite antenna

You can connect either a single satellite antenna directly to the digital receiver or several antennae via the converter box or multi-feed equipment LNB.

You can connect a further Sat-receiver (for example analogue) to the common antenna equipment receiver that has satellite signals.

4. Loop Via

If you have another analogue or digital STB and you wish to use the same LNB, then you can connect it via the loop via. Connect one end of a Coaxial cable to the LNB OUT

on the STB and connect the other end to the LNB IN on your second STB.

GB4

Image 5
Contents Digital Set-Top Box with Irdeto embedded Contents Liquids SafetyGlossary Copyright & GlossaryCopyright References Connecting a Satellite antennaDiSEqC 1.0 Connection DiSEqC 1.2 ConnectionSoftware Upgradeing Front Panel STB ConnectionsRS-232C Rear PanelWith a Hi-fi System TV onlyTV with VCR TV with VCR and Motorised System DiSEqC GB10 Remote Control Unit18 V-/V+ InformationFunction Guide Service PartInformation Box I-Plate GB12Teletext Service Changing ServicesVolume Control GB13GB14 SoundtrackSubtitle Configuration Service Service ListAll Service GB15Service Network Service FavouriteService Alphabetical GB16Main Menu Guide Quick GB18GB19 Now modeGB20 Weekly modeGB21 Reserved modeQuick mode GB22 Language Setting System SettingGB23 Menu LanguageGB24 Time SettingSubtitle Language Current TimeGB25 Wakeup Service NoWakeup Time Sleep TimeGB26 Output SettingVideo Output CVBS/S-Video/RGB Audio OutputDisplay Format Screen ModeGB27 GB28 Ntsc ModeOther Setting Menu Mode Service OrganisingGB29 OSD TransparencyGB30 Organise TV ServicesOrganise All Services GB31 GB32 Organise Favourite ServicesGB33 Organise Radio ServicesGB34 GB35 GB36 Organise Networks GB37Delete Satellites GB38GB39 Service SearchingAntenna Setting Manual Search GB40GB41 Guide of Main Menu Symbol Rate tableoptionalGB42 Automatic SearchGB43 StatusGB44 Conditional AccessVersion Information Smart card InformationMonitoring EMM/ECM Mail MessagesGB45 Setting your Receiver for DiSEqC Satellite Setting Menu OptionsMotorised System GB46Initial Satellite Position Search Motor Limit SettingGB47 Manual Satellite Search GB48Moving to a pre-set satellite Searching for services on your selected SatelliteGB49 GB50 GB51 Troubleshooting GuideGB52 Menu MapGB53 Specification Physical Specifications Power SupplyData In/Out GB55