Humax Digital Set-Top Box manual GB27, Screen Mode, Display Format

Screen Mode

To configure the TV screen mode, proceed as follows:

1.Activate the A/V Output Setting via the Main menu.

2.Select the Screen Mode item using the button.

3.Select the desired TV screen mode according to the connected

TV using the button. There are two modes: 16:9 and 4:3.

4.Press the OK ( ) or EXIT ( ) button to confirm.

Display Format

To configure the display format on the TV, proceed as follows:

1.Activate the A/V Output Setting via the Main menu.

2.Select the Display Format item using the button.

3.Select the desired display format depending on the TV using

the button. There are two mode pairs depending on the type of TV. If the TV supports only the 4:3 mode, there is one mode pair such as Centre and Letter-Box mode. If the TV supports the 16:9 mode, there is another mode pair such as Full and Pillar-box mode.

4.Press the OK ( ) or EXIT ( ) button to confirm.

The display format can be appropriately configured according to the selected Screen Mode.

If the Screen Mode is selected as 4:3, there are two modes, Centre and Letter-box in the display format. If the video is formatted as 16:9 and the display format selected as Centre mode, the right and left portions of the video are cut off to fit the 16:9 video into the 4:3 TV screen. If the video is formatted as 16:9 and the display format selected as Letter-box mode, the video is vertically shrunk to fully display on the 4:3 TV screen. In that state, the top and bottom of the TV screen are blacked out. If the video is formatted as 4:3, the display format is not applicable when the screen mode is selected as 4:3.

GB27