Humax CR-3510 manual Service List, Service Configuration, To change the attributes of a service

Page 16

Guide of Functions

Service List

To select the desired service in the service list, you should firstly

display the service list using button. Use buttons to

select a service and press button. Also use buttons to select a service directly in the service list.

The Service List consists of Service All and Service Favorite. On the Service List, you can change the attributes of a service through the Service Configuration.

button : Use to move to the previous or next service

button : Use to move to the forward or backward service (maximum 6 services).

Red button ( ) : Service All

Green button( ) : Service Favorite

Service Configuration

To change the attributes of a service.

1.Use the buttons to move a service you want to change in the Service All or Service Favorite mode.

2.Press the Menu( )button.

3.Use the buttons to move to an item (such as favorite,

lock, skip, delete) you want on the Service Configuration screen.

4.Use the buttons to select. Press the button to complete.

Service All

1.To display the service list, press the button.

Use Red( )button to select the Service All List.

2.Select the desired service by using the buttons.

3.Press the button to view the selected service.

The right side scroll-bar of the screen displays the location of the selected service in relation to All Services.

Service Favorite

1.To add the services to the Service Favorite, use the Service Configuration at Service All or Service Organizing menu.

2.When you press the Green( )button in the Service List, the favorite service list will be displayed on the screen.

3.When you want to see the services added to the favorite group,

use the button.

15

Image 16
Contents CR-3510 Important Safeguards Do not Expose this Receiver to Rain or MoisturePage Example Antenna Grounding As close to the point of cable entry as practical Support & Copyright Software Upgrade ReferenceConnect a Satellite antenna Loop ThroughConnecting the Set-Top Box Front & Real PanelViewing the STB programs Connecting the Set-Top Box to Your TV using a RF CableViewing the Free-To-Air or Cable programs Connecting the Set-Top Box to Your TV using a RCA Cable Using a HI-FI System for soundRecording a program from STB Viewing a program from the STB, Free-To-Air or CableRemote Control Unit Subtitle Reserved +/V10 TV/SAT Reserved 15 OKVolume Control SERVICE-PART Left side of the boxGuide of Functions Information Box I-PlateChanging Services To change services, do in the following sequenceSoundtrack TeletextService List Service ConfigurationTo change the attributes of a service Service AllInstallation Guide of Main MenuTV Guide Parental ControlNOW / Next mode Reserved mode Weekly modeQuick mode System Setting Language Setting Menu LanguageAudio Language Subtitle LanguageTime Setting VHF Tuning Output SettingOther Setting Service Organizing Organize TV ServicesOrganize All Services DeleteSkip LockRename Organize Favorite Services Moving the favorite group from the service groupOrganize Radio Services Organize NetworksService Searching Antenna SettingManual Search Conditional Access for CryptoWorks Embedded Signal DectionStatus STB StatusMaturity Rating Available EntitlementsPIN Code Default Setting Mail BoxTroubleshooting Guide Problem Solution About STBProblem Solution LED Error Message Menu Map Main MenuInstallation Utility Specification Conditional Access InterfaceTuner & Channel Mpeg Transport Stream A/V DecodingPower Supply Physical SpecificationData In/Out RF-ModulatorHTCR3510.700 As close to the point of cable entry as practical