Humax CR-3510 manual Output Setting, VHF Tuning, Other Setting

Page 23

A/V Output Setting

Audio Output

Set the Audio mode which is output from RCA/Cinch Jack. (Stereo/Mono)

Screen Mode

Select the aspect ratio of TV which is connected to STB(4:3 or 16:9).

Display Format

Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9,

STB will display in Letter-box or Center mode as selected. When your TV set is 16:9 and video source is 4:3,

STB will display in the Pillar-box or Full mode as selected.

NTSC Mode

Adjust this value between 3.58 and 4.43 if your TV displays the video only in black and white color. Normally NTSC 3.58 mode is used worldwide, but some TV sets can support only NTSC 4.43 mode.

VHF Tuning

When you watch TV after connecting a cable between

the RF OUT jack on STB and the Input jack (RF Input) on TV.

If you select Channel 3 or Channel 4 and then set VHF Tuning to Channel 3 or Channel 4, all services from STB will be viewed through TV Channel 3 or Channel 4.

Other Setting

Select the OSD transparency and Information Box Display Time.

OSD Transparency

Select the OSD transparent type. It affects Information Box, Service

List, Time and Quick mode of TV Guide. Use the buttons to toggle transparent and opaque.

Info. Box Display Time

Set the display duration of Information Box displayed on the screen after changing services. The time ranges from 0 to 20 seconds.

22

Image 23
Contents CR-3510 Do not Expose this Receiver to Rain or Moisture Important SafeguardsPage Example Antenna Grounding As close to the point of cable entry as practical Support & Copyright Loop Through Software UpgradeReference Connect a Satellite antennaFront & Real Panel Connecting the Set-Top BoxViewing the Free-To-Air or Cable programs Connecting the Set-Top Box to Your TV using a RF CableViewing the STB programs Using a HI-FI System for sound Connecting the Set-Top Box to Your TV using a RCA CableViewing a program from the STB, Free-To-Air or Cable Recording a program from STBRemote Control Unit 15 OK Subtitle Reserved+/V 10 TV/SAT ReservedInformation Box I-Plate Volume ControlSERVICE-PART Left side of the box Guide of FunctionsTeletext Changing ServicesTo change services, do in the following sequence SoundtrackService All Service ListService Configuration To change the attributes of a serviceParental Control InstallationGuide of Main Menu TV GuideNOW / Next mode Quick mode Weekly modeReserved mode System Setting Subtitle Language Language SettingMenu Language Audio LanguageTime Setting Other Setting Output SettingVHF Tuning Delete Service OrganizingOrganize TV Services Organize All ServicesRename LockSkip Organize Networks Organize Favorite ServicesMoving the favorite group from the service group Organize Radio ServicesAntenna Setting Service SearchingManual Search STB Status Conditional Access for CryptoWorks EmbeddedSignal Dection StatusPIN Code Available EntitlementsMaturity Rating Mail Box Default SettingProblem Solution About STB Troubleshooting GuideProblem Solution LED Error Message Main Menu Menu MapInstallation Utility Mpeg Transport Stream A/V Decoding SpecificationConditional Access Interface Tuner & ChannelRF-Modulator Power SupplyPhysical Specification Data In/OutHTCR3510.700 As close to the point of cable entry as practical