• Lock
1.Use the 
buttons to select a service to be locked by your PIN Code.
2.Press the Yellow( 
)button and the symbol ( 
) will be displayed at the right side of the service name.
3.Press the 
button and the message “Saving changed Service Information” will appear on the center of screen and simultaneously the selected service will be locked.
If you don’t want to lock, then press the 
button on the remote control.
If the message “Do you want to save?” appears on the center of
screen, then select 
.
To watch the locked service, be sure to enter your registered PIN Code.
• Skip
1.Use the 
buttons to select a service you want to skip.
2.Press the Blue( 
)button and the symbol( 
) will appear at the right side of the service name.
3.Press the 
button, and the message “Saving changed Service Information” will appear and simultaneously the selected service will be skipped.
If you don’t want to skip, then press the 
button.
If the message “Do you want to save?” appears on the center of
screen, select 
.
When the 
buttons or 
buttons are used to select channels, the skipped service channels will not be shown. To watch the skipped service channels, use the
Number buttons(0~9), Service List or the EPG mode.
• Rename
1.Use the 
buttons to select a service you want to rename.
2.Press the White( 
)button and the keyboard image will appear on the center of screen.
3.Use the 
buttons to select a new name and then
press the 
button.
4.Press the Yellow( 
)button to finish renaming.
24