Humax CR-3510 manual Manual Search

Page 28

Guide of Main Menu

Manual Search

Find the services manually in the transponder you select.

This search mode included normal advanced and SMATV search.

Antenna Alternative

Use the buttons to select an antenna number for the required satellite. The satellite name will help you select antennas.

If you want to search in SMATV mode, then select the Antenna Alternative 16.

Frequency

Use the buttons to enter the Frequency of the transponder you want to find (MHz). Or use the Number buttons(0~9) on the remote control.

Polarization

Use the

buttons to select the Polarization of the transponder.

Horizontal :

18 V are output through LNB line

Vertical :

13.5 V are output through LNB line

Symbol Rate

Inputs the Symbol Rate of the transponder you want to find.

FEC (Forward Error Correction)

Use the buttons to select the Forward Error Correction of the transponder. You can select the value of auto, 1/2, 2/3, 3/4, 5/6 and 7/8.

Network Search

Select “Yes” and you can find more services using the home network.

Automatic Skip

If you want to find free services, then select “Yes”. The scrambled services will not be automatically stored.

27

Image 28
Contents CR-3510 Important Safeguards Do not Expose this Receiver to Rain or MoisturePage Example Antenna Grounding As close to the point of cable entry as practical Support & Copyright Software Upgrade ReferenceConnect a Satellite antenna Loop ThroughConnecting the Set-Top Box Front & Real PanelViewing the STB programs Connecting the Set-Top Box to Your TV using a RF CableViewing the Free-To-Air or Cable programs Connecting the Set-Top Box to Your TV using a RCA Cable Using a HI-FI System for soundRecording a program from STB Viewing a program from the STB, Free-To-Air or CableRemote Control Unit Subtitle Reserved +/V10 TV/SAT Reserved 15 OKVolume Control SERVICE-PART Left side of the boxGuide of Functions Information Box I-PlateChanging Services To change services, do in the following sequenceSoundtrack TeletextService List Service ConfigurationTo change the attributes of a service Service AllInstallation Guide of Main MenuTV Guide Parental ControlNOW / Next mode Reserved mode Weekly modeQuick mode System Setting Language Setting Menu LanguageAudio Language Subtitle LanguageTime Setting VHF Tuning Output SettingOther Setting Service Organizing Organize TV ServicesOrganize All Services DeleteSkip LockRename Organize Favorite Services Moving the favorite group from the service groupOrganize Radio Services Organize NetworksService Searching Antenna SettingManual Search Conditional Access for CryptoWorks Embedded Signal DectionStatus STB StatusMaturity Rating Available EntitlementsPIN Code Default Setting Mail BoxTroubleshooting Guide Problem Solution About STBProblem Solution LED Error Message Menu Map Main MenuInstallation Utility Specification Conditional Access InterfaceTuner & Channel Mpeg Transport Stream A/V DecodingPower Supply Physical SpecificationData In/Out RF-ModulatorHTCR3510.700 As close to the point of cable entry as practical