Humax CR-3510 manual Service Searching, Antenna Setting

Page 27

3-3. Service Searching

Search for new services.

This mode includes Antenna Setting and Manual Search.

Antenna Setting

Select LNB parameters and switching connections.

Antenna Alternative

Use the buttons to select an antenna number for the required satellite. Antenna alternative 16 is fixed for SMATV and its name can’t be changed.

Satellite Name

Selects the satellite name that corresponds to the value of the

Antenna Alternative.

Press the

buttons and the satellite names you can memorize

will be listed on the screen.

Use the

 

buttons to select a satellite name and then press

the

button.

This name will help you Select Antenna Alternative In Manual

Search menu.

note : Press User defined and the keyboard image will appear on the screen. Then you can enter satellite names.

LNB Frequency

Use the buttons to select a LNB frequency or type on the dish.

You can select the LNB Frequency.

If the required LNB frequency is not available, then press the

Number buttons(0~9) on the remote control.

22KHz Tone

Use the buttons to select the antenna tone switch when LNB Frequency is universal.

22KHz tone will be switched automatically.

DiSEqC Input

Use the buttons to select a DiSEqC antenna switch type. (according to the option and location of DiSEqC switch)

Type : Disabled, Tone Burst A to B, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D

26

Image 27
Contents CR-3510 Do not Expose this Receiver to Rain or Moisture Important SafeguardsPage Example Antenna Grounding As close to the point of cable entry as practical Support & Copyright Loop Through Software UpgradeReference Connect a Satellite antennaFront & Real Panel Connecting the Set-Top BoxConnecting the Set-Top Box to Your TV using a RF Cable Viewing the STB programsViewing the Free-To-Air or Cable programs Using a HI-FI System for sound Connecting the Set-Top Box to Your TV using a RCA CableViewing a program from the STB, Free-To-Air or Cable Recording a program from STBRemote Control Unit 15 OK Subtitle Reserved+/V 10 TV/SAT ReservedInformation Box I-Plate Volume ControlSERVICE-PART Left side of the box Guide of FunctionsTeletext Changing ServicesTo change services, do in the following sequence SoundtrackService All Service ListService Configuration To change the attributes of a serviceParental Control InstallationGuide of Main Menu TV GuideNOW / Next mode Weekly mode Reserved modeQuick mode System Setting Subtitle Language Language SettingMenu Language Audio LanguageTime Setting Output Setting VHF TuningOther Setting Delete Service OrganizingOrganize TV Services Organize All ServicesLock SkipRename Organize Networks Organize Favorite ServicesMoving the favorite group from the service group Organize Radio ServicesAntenna Setting Service SearchingManual Search STB Status Conditional Access for CryptoWorks EmbeddedSignal Dection StatusAvailable Entitlements Maturity RatingPIN Code Mail Box Default SettingProblem Solution About STB Troubleshooting GuideProblem Solution LED Error Message Main Menu Menu MapInstallation Utility Mpeg Transport Stream A/V Decoding SpecificationConditional Access Interface Tuner & ChannelRF-Modulator Power SupplyPhysical Specification Data In/OutHTCR3510.700 As close to the point of cable entry as practical