4.If you do not see the information as described in step 3 of this procedure, you will need to check all cables and switches, and then run Check Switch again. Select Details for information that may be helpful in trouble- shooting the problem or in reporting it to the DISH Network Customer Service Center.
Adding More Switches
You can install two additional DISH Pro or DISH Pro Plus switches to the system, to support up to 12 satellite receivers total. Add the switches by repeating the previous installation instructions except connect the ports marked TO DISH on each added switch to the ports marked TO ADDITIONAL SWITCHES on an installed switch. See Figure 6.
Note: You must use the same group of trunk ports on each switch throughout the system. However, cables can be connected to any port in the group. For example: If TO DISH port numbers c through e are connected on the first switch, you must connect all switches together using ports c
through e.
16